THERN 4771 Helical Worm Gear Power Winch With 6 Ft. Pendant Control, 1.3 Hp, 115VAC, 1 Phase

Thern 4771 electric winch is a compact designed winch that provides heavy-duty power in tight spaces. It can pull or lift heavy loads in multiple directions. This winch is used on the floor, wall or ceiling for construction, wastewater and manufacturing applications.

Features:

• This hand winch features frame, drum and gearbox made of cast aluminium to resist corrosion on exposed surfaces.
• It is enclosed with an oil bath to lubricate the parts continuously.
• This electric winch comes with an automatic brake for positive load control.
• It is integrated with bronze ball bearings for efficient and smooth operations.
• This winch has a power cord with a push-button pendant.

Frequently Asked Questions:

Q. What is the line speed range of this electric winch?

A. 13 to 22 fpm.

Q. What is the 1st layer load capacity of this hand winch?

A. 2000 lb.

Q. How to attach a load to this electric winch?

A.

• Clear objects from the load's path to move freely and observe them while operating it.
• Use a nylon sling to attach the load or another rigging device.
• Close the hook latch completely before seating the sling in the saddle.
• Make sure the load is centred on the hook so that it doesn't tip over or rotate.

Q. How to install Thern 4771 electric winch?

A.

• Locate the winch in a traffic and obstacle-free area.
• Ensure that the winch is accessible for operation and maintenance.
• Place the winch in an adequate temperature area and adjust the fleet angle between 1/2 & 1-1/2 degrees.
• The proper fleet angle reduces the damage to the wire rope by helping the wire rope wind uniformly onto the drum.
• Place the winch for proper lubrication and determine the exact mounting position of the winch.
• Fasten the winch safely to the foundation.