SNAP-TITE SVHC4-4F Coupler Body, 1/4 Inch, 316 Stainless Steel, 5000 PSI

Uses:

Snap-Tite SVHC4-4F coupler body attaches to a nipple (male end of a coupling) for forming a hydraulic coupling, connecting to hoses & machinery in oil & gas, agricultural, construction & chemical industries. This Snap-Tite SVHC4-4F coupler body provides leak tight connections in hydraulic, coolant, fluid transfer / processing and cleaning lines & equipment.

Features:

• Snap-Tite SVHC4-4F coupler body is the H Series hydraulic coupler having two female end ports with NPSF connections for connecting to compatible hose and nipple.
• Snap-Tite SVHC4-4F coupler body, once linked with nipple and hose, forms a hydraulic coupling to allow free flow of fluid.
• The female end ports of the Snap-Tite SVHC4-4F coupler body have 1/4 - 18 inch thread size and sleeve lock, respectively, for preventing accidental disconnection of hydraulic lines.
• The Snap-Tite SVHC4-4F coupler body is equipped with a poppet valve & nitrile / Buna-N seal for preventing entry of contaminants into the hydraulic coupling or hydraulic lines.
• Snap-Tite SVHC4-4F coupler body is made of 316 stainless steel for corrosion resistance and preventing bending / breaking under harsh usage in abrasive environments.
• This Snap-Tite SVHC4-4F coupler body can handle a maximum flow rate of 14.38 lpm (liter per minute) and a maximum working pressure of 5000 psi at 70 degrees F.
• Snap-Tite SVHC4-4F coupler body operates at a temperature ranging from -40 to 200 degrees F.

Compatible Accessories:

• Nipple: Snap-Tite SVHC4-4F coupler body is attached to a compatible nipple of the same size for forming a complete coupling, allowing free flow of fluids through a hose connection.
• Dust caps & plugs: Snap-Tite SVHC4-4F coupler body is fitted with a dust cap / plug to prevent damage and entry of dust & contaminants into the coupler body. These dust cups / plugs are available in plastic and clear anodised aluminium variants to provide durability.
• Valve kits: Valve kits contain valve, valve spring and stop for replying old, worn out or faulty valve components of Snap-Tite SVHC4-4F coupler body.
• Coupler interface seals: Users can replace the coupler interface seals, including O-ring and backup ring, to provide a leak-tight connection in Snap-Tite SVHC4-4F coupler body.

Standards and Approvals:

• Snap-Tite SVHC4-4F coupler body is manufactured in accordance with PED 97/23/EC standard for user safety and efficient performance of this hydraulic coupling component.

Installation:

• Clean Snap-Tite SVHC4-4F coupler body, the compatible nipple and hose / machinery for preventing any damage & dust / debris.
• Attach Snap-Tite SVHC4-4F coupler body and nipple with their hoses on one end.
• Pull back the coupler sleeve of Snap-Tite SVHC4-4F coupler body, insert the nipple and release the sleeve for connecting the nipple with the coupling body.
• Now, the hydraulic coupling is ready for operation.

Frequently Asked Questions:

Q. Who owns Snap-Tite?

A. Snap-Tite, a fluid power component manufacturer based in Pennsylvania, USA, is owned by Parker Hannifin Corporation, a global leader in motion and control technologies.

Q. What steps do we follow for disconnecting Snap-Tite SVHC4-4F coupling body after use?

A.

• For disconnecting Snap-Tite SVHC4-4F coupling body, first release the internal pressure and shut down the system.
• Then, simply pull back the coupling sleeve in Snap-Tite SVHC4-4F coupling body and remove the nipple.
• The hoses at the end of the nipple and Snap-Tite SVHC4-4F coupling body can also be removed during regular maintenance & servicing.

Q. Do users need to use a valve with Snap-Tite SVHC4-4F coupler body for double or single shut-off operation?

A. Snap-Tite SVHC4-4F coupler body and the compatible nipples can operate with or without valves and in any combination of the valve assembly for double or single shut off operation.

Q. Does Raptor Supplies offer other variants of Snap-Tite SVHC4-4F coupling body?

A. Raptor Supplies offers numerous variants of Snap-Tite SVHC4-4F coupling body. We supply a coupling body having a maximum working pressure of 10000 psi. Users can also find coupling bodies having FNPT connection, Viton seal and a maximum operating temperature of 375 degrees F, on Raptor Supplies.