SCIENTIFIC CUTTING TOOLS TM12-1.25MM 100245 Thread Mill, Carbide, Bright Uncoated, 4 Flute, M12x1.25 Thread Size
Get it by Wednesday, Feb 25
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€238.04 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Thread Mill |
| Cutting Dia. | 0.345" |
| Cutting Length | 0.807" |
| Drilling Tool Configuration | Individual |
| End Mill Material | Carbide |
| Finish | Uncoated |
| Flute Type | Straight |
| Length | 0.022" |
| List Number | TM |
| Material | Solid Carbide |
| Material Applications | Composite, Steel |
| Measurement System | Metric |
| Min. Id Thread | M12 x 1.25 |
| Number Of Flutes | 4 |
| Overall Length | 3 1/2" |
| Pitch | 1.25 mm |
| Primary Material Application | Composite |
| Product Type | Straight Flute Thread Mill |
| Shank Dia. | 3/8" |
| Shank Length | 2.693" |
| Size | M12 |
| System Of Measurement | Metric |
| Thread Size | M12 x 1.25 |
| Thread Standard | Metric |
| Thread Type | Metric |
| Type | Internal, Straight |
Shipping Info:
| Ship weight (kg) | 0.1 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.89 |
| Ship width (cm) | 2.54 |
| HS code | 8207400000 |
| Country of Origin | US |
Product Variants
| Model | Number Of Flutes | Overall Length | Finish | Shank Dia. | Thread Size | List Number | Flute Type | Cutting Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| TM16-2.5MM | 4 | 3 1/2" | Bright | 1/2" | M16 x 2.5 | TM | Straight | 1.122" | €266.14 | |
| TM16-2.5MM-A | 4 | 3 1/2" | TiAlN | 1/2" | M16 x 2.5 | TM | Straight | 1.122" | €283.44 | |
| TM3.5-.6MM | 3 | 2 1/2" | Uncoated | 1/4" | M3.5 x .6 | TM | Straight | 0.269" | €197.20 | |
| TM3-.5MM | 3 | 2 1/2" | Uncoated | 1/4" | M3 x 0.5 | TM | Straight | 0.264" | €195.98 | |
| TM4.5-.75MM | 3 | 2 1/2" | Uncoated | 1/4" | M4.5 x .75 | TM | Straight | 0.337" | €197.20 | |
| TM4-.5MM | 3 | 2 1/2" | Uncoated | 1/4" | M4 x 0.5 | TM | Straight | 0.323" | €197.20 | |
| TM4-.7MM | 3 | 2 1/2" | Uncoated | 1/4" | M4 x 0.7 | TM | Straight | 0.342" | €207.74 |
Explore Products
- TITAN FASTENERS JVES03020X
- DIXON 63PT-0340 Insert, Compression Fitting, 3/16 Inch Size, Brass
- DORIAN PLC-FD-12-MT3
- APPROVED VENDOR U17420.025.0500 Eye Bolt, 1/4 In - 20 Thread Size, Routing, 5 In Shank Lg., 3 In Thread Lg., Steel
- NORTON ABRASIVES 66261147550 Sanding Belt, 23-5/8 Inch L, 1-3/16 Inch W, Zirconia Alumina, 120 Grit
- SLOAN 3140902 NAVAL 121-1.6-WWT Water Closet Flushometer, Manual, 1.6 gpf, PC Finish, Rear Spud, Single Flush
- PIP 18-575/XS Hand Protection Cut Resistant Gloves, XS, Gold, Dozen
- 80/20 25-6121 5.1 mm Replacement Bushing, 25 S
Explore More
- KEYSHAFT
- PECO CONTROL SYSTEMS
- VALLEY CRAFT
- ABBOTT WORKHOLDING PRODUCTS
- TUFFTRAK SAFETY
- Cable and Wire Crimping Tools
- Boltless Shelving
- Table Numbers and Card Holders
- Shelf Liners
- Flange
- AKRO-MILS 35180 Nest And Stack Totes
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 208V Delta Primary Volts, 480Y/277 Secondary Volts
- ASSOCIATED SPRING RAYMOND TI 250 Gas Springs, Inch
- GLOBE SCIENTIFIC Diamond Culture Tube Caps, for 25 mm Glass Culture Tubes
- METRO Push Handle
- HUBBELL-WIEGMANN N4X Single Door Wall-Mount Clamp
- DIXON Garden Hoses
- EATON Molded Case Circuit Breaker Jumper Kits
- VELP SCIENTIFIC Shafts
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
SCIENTIFIC CUTTING TOOLS TM12-1.25MM 100245 Thread Mill, Carbide, Bright Uncoated, 4 Flute, M12x1.25 Thread Size
€250.56 /unit