FREE delivery on orders over €150
SCIENTIFIC CUTTING TOOLS SPTM120LA 120250 Thread Mill, Carbide, TiAlN, 3 Flute, 0.1200 Inch Size Cutter Dia
Item: CU2FRNModel: SPTM120LACross Ref: 4PEN1 / 120250
7 In Stock
Ships within 2 days via
5.00% off
€77.05 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Thread Mill |
| Cutting Dia. | 3/25" |
| Cutting Length | 1/2" |
| Drilling Tool Configuration | Individual |
| End Mill Material | Carbide |
| Finish | TiAlN |
| Flute Type | Single Profile |
| Length | 0.016" |
| List Number | SPTM |
| Material | Solid Carbide |
| Material Applications | Composite, Hardened Steel, Steel |
| Measurement System | Fractional Inch |
| Min. Inside Dia. Thread | M4 |
| Neck Dia. | 0.07" |
| No. Of Flutes | 3 |
| Overall Length | 2" |
| Pitch | 32 to 56 |
| Primary Material Application | All Materials |
| Product Type | Single Profile Thread Mill |
| Recommended Tpi | 0.45 mm to 0.8 mm |
| Shank Dia. | 0.187" |
| Shank Length | 1 1/2" |
| Size | #8 |
| System Of Measurement | Imperial |
| Teeth Per Inch | 32 to 56 |
| Thread Size | #8-32-56 |
| Thread Standard | Universal |
| Thread Type | Inch |
| Tpi | 32-56 |
Shipping Info:
| Ship weight (kg) | 0.03 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 5.08 |
| Ship width (cm) | 2.54 |
| HS code | 8207400000 |
| Country of Origin | US |
Product Variants
| Model | Shank Dia. | Finish | Cutting Dia. | Cutting Length | Shank Length | Thread Standard | No. Of Flutes | Neck Dia. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| SPTM488 | 1/2" | Uncoated | 0.488" | 0.85" | 2.65" | - | 5 | 0.34" | €135.49 | |
| SPTM488L | 1/2" | Uncoated | 0.488" | 1.35" | 2.15" | un.png | 5 | 0.34" | €134.01 | |
| SPTM595 | 5/8" | Uncoated | 0.595" | 1 1/4" | 2 3/4" | un.png | 6 | 0.43" | €179.13 | |
| SPTM595L | 5/8" | Uncoated | 0.595" | 2" | 2" | un.png | 6 | 0.43" | €181.11 | |
| SPTM695 | 3/4" | Uncoated | 0.695" | 1 1/2" | 3 1/2" | un.png | 6 | 0.49" | €254.52 | |
| SPTM695L | 3/4" | Uncoated | 0.695" | 2 1/2" | 2 1/2" | un.png | 6 | - | €242.12 | |
| SPTM745 | 3/4" | Uncoated | 0.745" | 1 1/2" | 3 1/2" | un.png | 6 | 2/5" | €235.51 |
Explore Products
- HALLOWELL KISE18PT End Slope Top
- VERMONT GAGE 912312870 Pin Gage, Class ZZ, Go, BG, 12.87 mm Size
- REGAL 008394AS43 Spiral Point Tap, 5/16-18 Size, H5 Limit, 2 Flutes, Plug With Steam Oxide
- HUMBOLDT 5dpk0 Dynamic Cone Penetrometer Test Set
- DESTACO CPI-40FF-SB-60 Vacuum Cup-Smooth Bore
- WINTERS INSTRUMENTS D81RIR6CANSF2N Isolation Ring, Flange Sensor, 6 Inch, Cs Centre, Neoprene, Acetal Plates, Filled
- BOSTON GEAR KEY-39K
- NORGREN 4367x1.5-50 Tubing
Explore More
- KEYSHAFT
- DRAMM
- MAXLITE
- EDISON
- ODE
- Extrication and Rescue Gloves
- Pressure Washer Spray Guns and Wands
- Bollards
- Float Valves With Float
- Condensate Drain Pans
- DESTACO 227 Series Horizontal Hold Down Clamps
- LOC-LINE Extended Element
- RINGERS GLOVES Reflective Rope Rescue Gloves
- ASSOCIATED SPRING RAYMOND TU 1500 Gas Springs
- GLOBE SCIENTIFIC Screwcaps without O-Ring, for Sample Tubes
- MARTIN SPROCKET 3/8 Inch Drive 12 Point SAE Deep Sockets
- APPROVED VENDOR #10-32 Fully Threaded Slotted Plain Stainless Steel Round Thumb Screws
- ENERPAC XA Series Air Drive Hydraulic Foot Pumps
- TSUBAKI Multiple Strand Sprockets, 1/2 Inch Pitch
- WATTS RK-FBV Series Shutoff Valve Repair Kit
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
SCIENTIFIC CUTTING TOOLS SPTM120LA 120250 Thread Mill, Carbide, TiAlN, 3 Flute, 0.1200 Inch Size Cutter Dia
€81.11 /unit