REDLINE DETECTION 95-0170 High Pressure Diagnostic Leak Detector

Redline Detection 95-0170 PowerSmoke Pro diagnostic leak detector acts as a smoke machine to check the integrity of boosted, turbo & high-pressure automobile systems and detect leaks. This machine can even find boost leaks that an EVAP leak-detecting machine cannot detect. It saves diagnostic time, increases fuel economy and eliminates comebacks.

Features:

• Redline Detection PowerSmoke Pro diagnostic leak detector is suitable for diagnostic operations on high-performance engines and light to medium-duty trucks.
• It is powered by compressed air to perform pressure decay or leak-down tests.
• This machine operates at 40 times the pressure as compared to a typical EVAP pressure machine.
• Variable pressure and flow features allow operators to replicate a boost load and pinpoint leaks in a switched-off engine.

Frequently Asked Questions:

Q. What items are included with this Redline Detection 95-0170 diagnostic leak detector?

A. This diagnostic leak detector comes with an accessory storage case, two Power Intake adaptors (2.9 & 1.9 inches), two vapour-producing fluid bottles, a block off coupler, an AC power cable, a halogen inspection light, a hex key, an oxygen sensor port adaptor and temperature & pressure sensor port adaptors.

Q. What is the voltage rating of this Redline Detection 95-0170 PowerSmoke Pro diagnostic leak detector?

A. Redline Detection 95-0170 diagnostic leak detector is powered at voltage ratings of 110 to 250VAC or 12VDC.

Q. What is the operating pressure of this Redline Detection 95-0170 diagnostic leak detector?

A. Redline Detection 95-0170 diagnostic leak detector operates at pressures ranging from 2 to 20 psi (0.14 to 1.4 bar).