FREE delivery on orders over €150
Product Specifications:
| Item | Solenoid Valve |
| Application | Air Compressors, Car Wash Equipment, Industrial Water Control, Laundry Equipment, Pumps |
| Body Material | Brass |
| Center Line Pipe Center Size | 3.437" |
| Class | Class F |
| Coefficient Of Volume | 4 |
| Coil Enclosure | Watertight |
| Coil Insulation Class | F |
| Electrical Connections | 1/2" Conduit Hub |
| For Media | Air, Inert Gases, Light Oil, Water |
| Frequency | 50/60 Hz |
| Hz | 60 Hz |
| Includes Coil | Yes |
| Includes Seal | Yes |
| Inlet Connection Type | NPTF |
| Ip Rating | IP66 |
| Max. Ambient Temperature | 140°F |
| Max. Fluid Temp. | 180°F |
| Max. Operating Pressure Differential - Steam | Not Rated |
| Max. Operating Pressure Differential Air/inert Gas | 150 psi |
| Max. Operating Pressure Differential Light Oil | 125 psi |
| Max. Operating Pressure Differential Water | 150 psi |
| Media Type | Air, Inert Gas, Light Oil, Water |
| Min. Ambient Temperature | 14°F |
| Min. Operating Pressure Differential | 0 psi |
| Mounting Orientation | Vertical |
| Nema Rating | NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X |
| Nominal Pipe Size | 1/2" |
| Operating Environment | Indoor, Outdoor |
| Operation | Pilot Operated |
| Operation Type | Pilot Operated |
| Orifice Dia. | 5/8" |
| Outlet Connection Type | NPTF |
| Overall Height | 4 3/8" |
| Overall Length | 2 3/4" |
| Overall Width | 2 5/16" |
| Pipe Size | 1/2" |
| Response Time | 1 sec. |
| Seal Material | Nbr |
| Valve Configuration | Normally Open |
| Valve Positions | 2 Position |
| Valve Type | High Flow |
| Valve Ways | 2-Way |
| Valve Ways And Positions | 2 Ways And 2 Positions |
| Voltage | 110/120V AC |
| Wattage | 10.1 W |
Shipping Info:
| Ship weight (kg) | 1.04 |
| Ship height (cm) | 12.95 |
| Ship length (cm) | 10.67 |
| Ship width (cm) | 8.13 |
| HS code | 8481809005 |
| Country of Origin | MX |
Explore Products
- APPROVED VENDOR H165DW Drill Bushing Type H Drill Size 3.2mm
- FABORY U55580.025.0050 Dowel Pin, General, 1/2 In Lg., 1/4 In Pin Dia., Gr. 316, SS, Unhardened GRnd
- DAYTON 13V757 V-Belt, 5V1800, 180 in Outside Lg, 5/8 in Top Wd, 0.531 in Thick, Polyester
- NORTON ABRASIVES 66253043412 Straight Grinding Wheel, 8 Inch Dia., 1 1/4 Inch Hole Size, Type 1
- MICRO 100 DM-625-490X End Mill, 0.625 Inch Cutter Dia., 0.625 Inch Shank Dia., 1.25 Inch Length of Cut
- SPEARS VALVES 93252K850-012 Special Reinforced Diaphragm Valve, FKM, Air To Spring Open, 90 PSI, 1-1/4 Size, CPVC
- T&S 017A Cold Spindle Assembly, With Lever Handle
- BALDOR / DODGE 901070 TA1107SCA Adapter Hardware Kit
Explore More
- KEYSHAFT
- TREGASKISS
- ALMAN RUBBER
- CALIFORNIA AIR TOOLS
- AIRCARE
- Towing Accessories
- Recessed Troffer Fixtures
- Strapping Dispensers
- Strip Heaters
- Rupture Discs
- AKRO-MILS 35200 Nest And Stack Totes
- HELICOIL Spiral Point Plugs, UNC, 2B
- KEO NC Spotting Drills, 120 Degrees Point Angle
- GLOBE SCIENTIFIC Jars, Wide Mouth, 120 mm Opening
- ANVIL 2177 Series Socket Weld Caps, Forged Steel
- JARKE Cantilever Rack Add-On Unit
- HOFFMAN Proline G2 Series Pagoda Tops
- GATES ATV/Snowmobile Belts
- REGAL End Mills, Single End, 3 Flutes, HSS, CC, ALTiN
- WATTS LF26A Series Water Pressure Regulators, Lead Free
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
RED HAT 8210G034 Solenoid Valve 2/2 1/2 Inch NO 120V Brass
€452.98 /unit