FREE delivery on orders over €150
RED HAT 8210G001 Solenoid Valve 2/2 3/8 Inch NC 12V Brass
Item: AD7HHVModel: 8210G001Cross Ref: 4EKT9
7 In Stock
Ships within 2 days via
10.00% off
€224.38 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Solenoid Valve |
| Application | Air Compressors, Car Wash Equipment, Industrial Water Control, Laundry Equipment, Pumps |
| Body Material | Brass |
| Center Line Pipe Center Size | 2.812" |
| Class | Class F |
| Coefficient Of Volume | 3 |
| Coefficient Of Volume (cv) | 3 |
| Coil Enclosure | Watertight |
| Coil Insulation Class | F |
| Electrical Connections | 1/2" Conduit Hub |
| For Media | Air, Inert Gases, Light Oil, Water |
| Frequency | 50/60 Hz |
| Includes Coil | Yes |
| Includes Seal | Yes |
| Inlet Connection Type | NPTF |
| Ip Rating | IP66 |
| Max. Ambient Temperature | 140°F |
| Max. Fluid Temp. | 150°F |
| Max. Fluid Temperature | 180°F |
| Max. Operating Pressure Differential - Air/inert Gas | 125 psi |
| Max. Operating Pressure Differential - Steam | Not Rated |
| Max. Operating Pressure Differential Air/inert Gas | 200 psi |
| Max. Operating Pressure Differential Light Oil | 135 psi |
| Max. Operating Pressure Differential Water | 150 psi |
| Media Type | Air, Inert Gas, Light Oil, Water |
| Min. Ambient Temperature | 14°F |
| Min. Operating Pressure Differential | 5 psi |
| Mounting Orientation | Vertical |
| Nema Rating | NEMA 1, NEMA 2, NEMA 3, NEMA 3S, NEMA 4, NEMA 4X |
| Nominal Pipe Size | 3/8" |
| Operating Environment | Indoor, Outdoor |
| Operation | Pilot Operated |
| Operation Type | Pilot Operated |
| Orifice Dia. | 5/8" |
| Outlet Connection Type | NPTF |
| Overall Height | 3 3/8" |
| Overall Length | 3 1/4" |
| Overall Width | 2 5/16" |
| Pipe Size | 3/8" |
| Response Time | 1 sec. |
| Seal Material | Nbr |
| Valve Configuration | Normally Closed |
| Valve Positions | 2 Position |
| Valve Type | High Flow |
| Valve Ways | 2-Way |
| Valve Ways And Positions | 2 Ways And 2 Positions |
| Voltage | 12V DC |
| Wattage | 6.1 W |
Shipping Info:
| Ship weight (kg) | 1.06 |
| Ship height (cm) | 14.48 |
| Ship length (cm) | 11.68 |
| Ship width (cm) | 8.89 |
| HS code | 8481809005 |
| Country of Origin | MX |
Explore Products
- T&S B-0199-09-N035 Spray Device, Vandal Resistant, 0.35 GPM, Non-Aerated Asm., 15/16-27 UN Male
- APPLETON ELECTRIC AE321 Receptacle Box, 2 Wire, 2 Pole
- HOFFMAN A60X4912SSLPN4 11097 Floor Mount Disconnect Enclosure 2 Door, 3 Point Latch, 60 x 49 x 12 Inch Size
- GRAINGER ZUSAV5X180 O-Ring, 180 mm Inside Dia, 190 mm Outside Dia, 190 mm Actual Outside Dia, Black
- WINTERS INSTRUMENTS PBC1237 4 Inch, Forged Brass Case, 1/2 Inch, Bottom, 30 Inch, Hg-0-60 Psi/Kpa
- WATTS FRK 805/825YS-CK4 1 1/2-2 905055S Silicone Check Kit, 1 1/2 and 2 Inch Size
- GRAINGER 1522-375500-25 Tubing, Pp, Black, 1/2 Inch OD, 3/8 Inch Id, 25 Ft Length, Rockwell R 70
Explore More
- BIL-JAX
- EREM
- KEYSHAFT
- NIBCO
- SECUREFIT
- Solders
- Carbide Bur Sets
- Feeler Gauge Sets
- Wheel Chock Accessories
- Vibratory Tumblers
- AKRO-MILS 35195 Nest And Stack Totes
- ANSELL 97-008 Activarmr Nitrile Coating Cut Resistant Gloves
- ANSELL 04-644 Alphatec Comfortable Pvc Coated Gloves
- HONEYWELL Cut Resistant Gloves, High Performance Polyethylene
- RINGERS GLOVES Heavy-Duty Impact Gloves
- PASS AND SEYMOUR Plugtail Series Industrial Receptacles
- SLOAN Housings
- SMC VALVES Tie Rod Cylinder
- DREMEL Straight Cutting Blades for Oscillating Tools
- GRAINGER High Performance Roughing/Finishing Coated Carbide Corner Radius End Mills
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
RED HAT 8210G001 Solenoid Valve 2/2 3/8 Inch NC 12V Brass
€249.31 /unit