FREE delivery on orders over €150
ONSRUD 60-171MW Routing End Mill Compression 1/2 1 3/8
Item: AD9ZZRModel: 60-171MWCross Ref: 4WAA2
7 In Stock
Ships within 2 days via
13.00% off
€166.49 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Routing End Mill |
| Cutter Dia. | 1/2" |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Length | 1 3/8" |
| Cutting Type | Center |
| Dimensions Type | Fractional Inch |
| End | Single |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Type | Square |
| Finish | Uncoated |
| Finish-machining | Bright (Uncoated) |
| Grade | High Performance |
| Helix Angle | 30° |
| List Number | 60-100MW |
| Material | Carbide |
| Material Grade-machining | HIGH PERFORMANCE |
| Material-machining | Carbide |
| Measurement System | Fractional Inch |
| No. Of Flutes | 2 |
| Overall Length | 3 1/2" |
| Primary Material Application | Composite, Wood |
| Primary Material Application Iso Code | O |
| Router Bit Flute Type | Compression Spiral |
| Shank Dia. | 1/2" |
| Single End/double End | Single End |
| Type | Compression |
Shipping Info:
| Ship weight (kg) | 0.14 |
| Ship height (cm) | 2.03 |
| Ship length (cm) | 10.16 |
| Ship width (cm) | 2.03 |
| HS code | 8207706060 |
| Country of Origin | US |
Product Variants
| Model | Material | Shank Dia. | Dia. | No. Of Flutes | End Type | Helix Angle | End | Dimensions Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 62-816 | Carbide | 6 mm | 3 mm | 1 | Square | 21° | Square | Metric | €60.95 | |
| 62-824 | Carbide | 6 mm | 4 mm | 1 | Square | 21° | Square | Metric | €60.95 | |
| 62-830 | Carbide | 6 mm | 5 mm | 1 | Square | 21° | Square | Metric | €60.95 | |
| 62-840 | Carbide | 6 mm | 6 mm | 1 | Square | 21° | Square | Metric | €72.66 | |
| 62-842 | Carbide | 6 mm | 6 mm | 1 | Square | 21° | Square | Metric | €80.15 | |
| 62-844 | Carbide | 8 mm | 8 mm | 1 | Square | 21° | Square | Metric | €81.45 | |
| 62-846 | Carbide | 8 mm | 8 mm | 1 | Square | 21° | Square | Metric | €82.01 |
Explore Products
- MAIN FILTER INC. MF0356593 RA32K10 Interchange Hydraulic Filter, Glass, 10 Micron Rating, Seal, 3.14 Inch Height
- CH HANSON 25850 Round Face Letter Set, Low Stress, 3/16 Inch Character Size
- EATON ECX09G1EKA-R63/D
- CASH VALVE GT11310724 Pressure Spring
- LENOX TOOLS DW4523 / DWE402 Depressed Center Wheels, 4 1/2 Inch Dia, 5/8-11 Inch Hole, Aluminum Oxide, 24 Grit
- IFM MK5137 T-Slot Pneumatic Cylinder Position Sensor, AMR, 10-30V DC, 3 Wires, 100 mA
- GROVE GEAR EL8300235.00 EL-BMQ830-30-R-140 Right Angle Gear Reducer, 58 RPM Output, 2519 lb-in Torque, Aluminum, H1 Right Output
Explore More
- KEYSHAFT
- DEAD ON TOOLS
- SIMMONS
- SUNPERIAN
- MARTOR
- Label Applicators
- Limit/Interlock Switches
- Compressed Air Sprayers
- Caster Sockets Brackets and Floor Locks
- Linear Shafting and Support Rails
- PEWAG Chain Sling, Grade 100
- LOUISVILLE FS1300HD Series Fiberglass Step Ladders
- FACOM 22 Midget Open End Wrenches, 15° Hinged
- OK INDUSTRIES Wire Wrapping Wires, Pre-Cut and Pre-Stripped
- ANVIL 001LDG Series Adjustable Clevis Hangers, Electro-Galvanized, Light Duty, Imperial
- LABELMASTER Hazcom Label, Health, Flammability, Reactivity
- ANVIL Forged Steel Threaded Caps
- APPROVED VENDOR M12 x 1.75 Zinc Plated Steel Clamping U-Bolts
- APPROVED VENDOR 1" Outside Dia. Steel Round Spacers
- CAMPBELL CHAIN AND FITTINGS Sash Chains
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
ONSRUD 60-171MW Routing End Mill Compression 1/2 1 3/8
€191.37 /unit