NTN sesp205-16
Request a Quote
Payment
Delivery
Product Specifications:
| Adapter Nut Sleeve/eccent Lock Collar Outside Dia. (d1) | 38.1 mm |
| Distance Between Front Side And Bearing Centre (s) | 7.5 mm |
| Distance Between Mounting Base To Centerline Spheric Seating Dia. (h) | 36.5 mm |
| Dynamic Load (c) | 14 kN |
| Grease Fitting (g) | M6 x 1 |
| Housing Foot Height (h1) | 16 mm |
| Housing Height (h2) | 70 mm |
| Housing Length (l) | 140 mm |
| Housing Top Width (a1) | 24 mm |
| Housing Width | 38 mm |
| Inner Ring Width B | 21.5 mm |
| Max. Operating Temp. | 100° |
| Min. Operating Temp. | -20° |
| Mounting Hole Dimension (n) | 13 mm |
| Mounting Hole Length (n1) | 19 mm |
| Mounting Holes Distance (j) | 105 mm |
| Recommended Set Screw Tightening Torque | 3.9 N-m |
| Shaft Dia. | 25.4 mm |
| Static Load Rating (c0) | 7.8 kN |
Explore Products
- MAIN FILTER INC. MF0508102 Hydraulic Filter, Wire Mesh, 125 Micron, Viton Seal, 3.34 Inch Height
- GENERAL ELECTRIC CR123C550B Heater Element, 5.2 Fla
- ECEF 67100307001 Insert Bit, 3,0mm Size, Hexagonal
- ACCUFORM SIGNS mpl116mg10 DOT PLACARD HAZARD CLASS 1 MPL116MG10
- SLOAN 324059 Standard Crown
- SMC VALVES CQ2B40-65Z-DUV02463 Compact Cylinder
- KIPP k0647.0541004x15 Cam levers adjustable stainless, ext. thread, thrust washer stainless
- SMC VALVES CDQ2A63-20DZ-M9PWZ Compact Cylinder, Double Acting, Single Rod, 63Mm Bore Size, 20 Mm Stroke Length
Explore More
- KEYSHAFT
- RWM
- PERMAKLEEN
- AMERICAN ELECTRIC
- UNITED SALES
- Engine-Driven Compressor Controls
- Flame Resistant and Arc Flash Undergarments
- Pendant Control Stations
- Impact Socket Bit Drivers
- Enclosure Window and Louver Kits
- HELICOIL Spiral Point Plug Taps, UNC, 3B
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 480V Delta Primary Volts, 240 Delta /120 Tap Secondary Volts
- MUELLER INDUSTRIES 1603-AC Chexter Check Valves
- ANVIL 367 Series Concentric Reducers, Black, Cast Iron
- ANVIL 1122 Series Couplings, Right/Left, Black
- APPROVED VENDOR M10 x 1 Fully Threaded Zinc Plated Steel Hex Head Cap Screws
- APPROVED VENDOR #2-56 Partially Threaded Standard Hex Cylindrical Alloy Steel Socket Head Cap Screws
- APPROVED VENDOR Rounded Carbon Steel Standard Taper Pins
- GRAINGER Snap On Clamps for Tube And Hose
- SCOTCH Adhesive Applicators
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN sesp205-16