NTN nup2208eat2xc3u
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 23 mm |
| Dynamic Load (c) | 85.5 kN |
| External Dia. (d) | 80 mm |
| Fatigue Limit Load (cu) | 9.45 kN |
| Grease Lubrication Limit Speed (n Lim) | 7600 turns/min. |
| Internal Dia. (d) | 40 mm |
| Ir Flange Outside Dia. (d1) | 53.9 mm |
| Max. Fillet Radius (r1a) | 1 mm |
| Max. Fillet Radius (ra) | 1 mm |
| Max. Operating Temp. | 120° |
| Max. Shoulder Or Dia. (da) | 73.5 mm |
| Min. Fillet Radius (rns) | 1.1 mm |
| Min. Fillet Radius (rs) | 1.1 mm |
| Min. Operating Temp. | -20° |
| Min. Shoulder Dia. Ir (da) | 46.5 mm |
| Min. Small Face Shoulder Dia. (db) | 72.5 mm |
| Oil Lubrication Limit Speed (n) | 10700 turns/min. |
| Radial Clearance Class | C3 |
| Static Load Rating (c0) | 77.5 kN |
| Under Roller Dia. (f) | 49.5 mm |
| Upper Roller Dia. (e) | 71.5 mm |
Explore Products
- CEMENTEX USA MC5P-CG Cabinet Tip Screwdriver, 3/16 x 5 Inch Size
- APPROVED VENDOR 6P842 Nipple 1-1/4 Inch 4 Inch Galvanised Welded Steel
- SMC VALVES NCGLA40-0600 Round Body Cyinder, 3/4 To 2-1/2 Inch Bore Range
- PROTO J5270HAM Flex Socket 3/8 Inch Drive 7mm 6 Point Standard
- HALO h2922ict H2922Ict
- WERA TOOLS 05020070001 Combination Wrench, Alloy Steel, 19/32 Inch Head Size, 7 3/4 Inch Overall Length, Offset
- SMC VALVES MGPL20-250Z-M9BL Compact Guide Cylinder
- SMC VALVES MGPM20-400Z-XC35 Compact Guide Cylinder
Explore More
- KEYSHAFT
- SAFETY TECHNOLOGY INTERNATIONAL
- TE-CO
- VALLEY CRAFT
- SAGINAW
- Bottled Water Dispensers
- Wedge Anchors
- Bulk Storage Lockers
- Gas Detector Interface Hardware
- Dual Wheel Casters
- DESTACO 201 Series Vertical Hold Down Clamps
- IRONCLAD Vibration Impact Gloves
- JOHN GUEST Male Connectors, NPTF Thread, Polypropylene White
- GLOBE SCIENTIFIC Label Sheets, Cryo, 24 x 13 mm Size
- ANVIL 2805 Series Flat Anvilets, SW
- WERA TOOLS Ball End Hex Key
- SPEEDAIRE Air Regulator, Nonrising
- APOLLO VALVES Tailpieces
- MI-T-M Conduits
- VICKERS In-Line Check Valves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN nup2208eat2xc3u