Product Specifications:
| Bearing Inner Ring Width (b) | 33 mm |
| Dynamic Load (c) | 195 kN |
| External Dia. (d) | 210 mm |
| Fatigue Limit Load (cu) | 25.7 kN |
| Grease Lubrication Limit Speed (n Lim) | 3200 turns/min. |
| Internal Dia. (d) | 140 mm |
| Max. Fillet Radius (r1a) | 1 mm |
| Max. Fillet Radius (ra) | 2 mm |
| Max. Operating Temp. | 120° |
| Max. Shoulder Or Dia. (da) | 201 mm |
| Max. Small Face Shoulder Dia. (da) | 156 mm |
| Min. Fillet Radius (r1s) | 1.1 mm |
| Min. Fillet Radius (rs) | 2 mm |
| Min. Inside Ring Dia. (db) | 161 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 146.5 mm |
| Oil Lubrication Limit Speed (n) | 3800 turns/min. |
| Radial Clearance Class | Cn |
| Static Load Rating (c0) | 250 kN |
| Under Roller Dia. (f) | 158 mm |
| Upper Roller Dia. (e) | 192 mm |
Explore Products
- GRAINGER ZUSA-HT-3437 Tubing, Fep, Clear, 1 Inch Id, 11/8 Inch OD, 2Ft Length, Shore D 55
- GRAINGER 206-001050 Square End Mill, Carbide, Single End, 3/8 Inch Length Of Cut
- 3M 98559
- SMC VALVES SS5Y5-11T-07D-N7 Solenoid Valve, 4/5 Port
- LOUISVILLE FM1503 Twin Stepladder, 3 Ft. Ladder Height, 300 Lbs. Load Capacity, Fiberglass
- PARKER SCPSD-400-14-15
- OSG 7830124 Exchangeable Head End Mill
- TSUBAKI 35B30SS Plain Bore Sprocket, 1/2 Inch Height
Explore More
- CAMRAIL
- FAST CAP
- KEYSHAFT
- XCELITE
- MACURCO
- Table Numbers and Card Holders
- Cotter Pins
- Pry Bar Lever Dollies
- Plastic Square Rods
- Hydraulic High Pressure Filters
- LOUISVILLE FS1500 Series Fiberglass Step Ladders
- MEMPHIS GLOVE Leather Drivers Work Gloves
- ANSELL 37-155 Alphatec Solvex Comfortable Chemical Resistant Gloves
- ANSELL 47-402 Activarmr Comfortable Oil Repellent Gloves For Medium Duty Tasks
- RUD CHAIN Washers
- MAIN FILTER INC. Hydraulic Filters, Wire Mesh, 50 Micron
- APPROVED VENDOR #4-40 Fully Threaded Standard Phillips Pan External Tooth Zinc Plated Steel Rounded Machine Screws
- ZURN 950XLT2 Double Check Backflow Preventers
- SANDPIPER Manifolds
- MACROMATIC TH4 Series High Ampere Output Relays, 1.8 To 180 Sec. Time Range
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN nu1028