Product Specifications:
| Bearing Inner Ring Width (b) | 73 mm |
| Dynamic Load (c) | 455 kN |
| External Dia. (d) | 215 mm |
| Fatigue Limit Load (cu) | 54 kN |
| Grease Lubrication Limit Speed (n Lim) | 2900 turns/min. |
| Internal Dia. (d) | 100 mm |
| Ir Flange Outside Dia. (d1) | 140.5 mm |
| Max. Fillet Radius (ra) | 2.5 mm |
| Max. Operating Temp. | 120° |
| Max. Shoulder Or Dia. (da) | 202 mm |
| Max. Small Face Shoulder Dia. (da) | 125 mm |
| Min. Fillet Radius (r1s) | 3 mm |
| Min. Fillet Radius (rs) | 3 mm |
| Min. Inside Ring Dia. (dc) | 143 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 113 mm |
| Oil Lubrication Limit Speed (n) | 3400 turns/min. |
| Radial Clearance Class | Cn |
| Static Load Rating (c0) | 505 kN |
| Under Roller Dia. (f) | 129.5 mm |
| Upper Roller Dia. (e) | 185.5 mm |
Explore Products
- GATES 71042439 Hose Coupling, 0.5 Inch I.D, 3.3 Inch Length, 1.831 Inch Cutoff Size
- GEARENCH ZWS28
- HUBBELL WIRING DEVICE-KELLEMS PDB12LPBK
- GATES 310-5M-09 Round Tooth Timing Belt, 5mm Pitch, 62 Teeth
- ARCH CUTTING TOOLS SCMT 32.51 UD52 Carbide Insert Square
- GROVE GEAR GR8520623.35 GR-HMQ852-10-H1-250-35 Right Angle Gear Reducer, 10 to 1 Reduction Ratio, 175 RPM Output, 7827 lb-in Torque, Cast Iron
- LEONARD VALVE xl-200-sw-lf-bdt Mixing Valve, Lead Free Bronze, 135 gpm
- SMC VALVES BDP-07G Tie Rod Cylinder
Explore More
- FLINT & WALLING
- KEYSHAFT
- KINEDYNE
- TRIMCO GROUP
- KANCA
- Plug Fuses
- Twin Wheel Casters
- Emergency Stop Push Buttons with Contact Block
- Gear Lockers
- Drive Tighteners
- AKRO-MILS 30281 Akrobins Super Size Bins
- OIL SAFE Fill Point ID Washers
- PROPPER Men's Uniform Tactical Pants
- PYRAMEX OTS Over the Spectacle Eyewears
- ANVIL 2175 Series Socket Weld Half Couplings, Forged Steel
- DORIAN QITPN-1 Turning And Facing Toolholder
- SPEARS VALVES Schedule 80 CPVC Gray Clamp-On Saddles, SR Threaded, Single Outlet, with EPDM O-ring Seal and SS Hardware
- MARTIN SPROCKET Stock Bore C Type Flame Cut Sprockets, 124 Chain Number
- GROVE GEAR EL Series, BM-R Style, 842 Size, Aluminium Worm Gear Reducers
- MILLER ELECTRIC MIG Conductor Tubes
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN nj2320