NTN nj2212eg1c3
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 28 mm |
| Dynamic Load (c) | 131 kN |
| External Dia. (d) | 110 mm |
| Fatigue Limit Load (cu) | 19.1 kN |
| Grease Lubrication Limit Speed (n Lim) | 5200 turns/min. |
| Internal Dia. (d) | 60 mm |
| Ir Flange Outside Dia. (d1) | 77.6 mm |
| Max. Fillet Radius (ra) | 1.5 mm |
| Max. Operating Temp. | 120° |
| Max. Shoulder Or Dia. (da) | 102 mm |
| Max. Small Face Shoulder Dia. (da) | 71 mm |
| Min. Fillet Radius (r1s) | 1.5 mm |
| Min. Fillet Radius (rs) | 1.5 mm |
| Min. Inside Ring Dia. (dc) | 80 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 68 mm |
| Oil Lubrication Limit Speed (n) | 6100 turns/min. |
| Radial Clearance Class | C3 |
| Static Load Rating (c0) | 157 kN |
| Under Roller Dia. (f) | 72 mm |
| Upper Roller Dia. (e) | 100 mm |
Explore Products
- SPEC EM1301200223M Extension Spring, Metric To Looped End Extension, Music Wire, 222.5 mm Overall Length
- WEG CFW900C70P0T2DB20Y2B 15414329 Variable Speed Drive, 200-240 V, 3 Phase, 59 A, IP20
- GRAINGER 12628_24_48 Grade 2 Titanium Sheet, 4 ft Overall Length, 24 Inch Overall Width, 0.04 Inch Thick
- DIXON SG375 Band And Buckle Strapping, 100 Ft. Length, 0.025 Inch Thickness
- SMC VALVES MXS8-75AS-M9BWZ Cylinder, Air Slide Table
- STARRETT 91430-12-05 Band Saw Blade Coil Stock, Carbon Steel, 1/2 Inch Width, 24 TPI, 12 Ft. 5 Inch Coil
- SMC VALVES NCDY2S15H-0500BS-F7PVZ Rodless Cylinder
- REGAL 008446AS25 Hand Tap, 7/16-14 Size, H3 Limit, 3 Flutes, Bottom With Tin Coating
Explore More
- AMERICAN TORCH TIP
- KEYSHAFT
- VAL-MATIC
- DAYBRITE
- ALLIANCE HOSE & RUBBER
- Kneeling Pads
- Potentiometers
- Double End Drill Bits
- Voice Data Jack Boxes
- STARRETT Steel Straight Edge
- DESTACO Flat Tip Bonded Neoprene Spindle Metric
- CONDOR Chainmail Cut Resistant Gloves
- YELLOW JACKET Plus II Hose Sets With FlexFlow Valve
- ANVIL 260RISS Series Clevis Hangers With Insulation Saddle Systems
- SIMONDS Slim Taper Saw File
- ACROVYN Right Hand End Cap, Impact Resistant
- APPROVED VENDOR 6mm Outside Dia. Nylon Plastic Round Spacers
- APPROVED VENDOR #10-24 Smooth Flat Hex Grade 18-8 Stainless Steel Shoulder Screws
- VICKERS SystemStak Dual Flow Control Valves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN nj2212eg1c3