Product Specifications:
| Bearing, Drawn Cup, Outer Ring Width (c) | 40 mm |
| Dynamic Load Rating (cr) | 67 kN |
| External Dia. (d) | 62 mm |
| Grease Lubrication Limit Speed (n Lim) | 5500 turns/min. |
| Hole Dia. (k) | 2.5 mm |
| Internal Dia. (d) | 40 mm |
| Lubrication Hole On Inner Ring | No |
| Max. Axial Offset (s) | 0.5 mm |
| Max. Operating Temp. | 120° |
| Max. Shaft & Housing Fillet Radius (ras) | 0.6 mm |
| Max. Shoulder Or Dia. (da) | 58 mm |
| Min. Fillet Radius (rs) | 0.6 mm |
| Min. Operating Temp. | -20° |
| Min. Shoulder Dia. Ir (da) | 44 mm |
| Oil Lubrication Limit Speed (n) | 8500 turns/min. |
| Outer Ring Lubrication Hole | Yes |
| Precision Class | Class P0 |
| Radial Clearance Class | Cn |
| Static Load Rating (c0r) | 116 kN |
| Under Roller Dia. (f) | 48 mm |
Explore Products
- STREN-FLEX SF1610G10DOL Chain Sling, 10 Ft Sling Length, 15000 Lb Sling Capacity At 30 Deg, 1/2 Inch Chain Size
- APOLLO VALVES 29402A160 Relief Valve, 1 x 1-1/4 Inch Size
- ANVIL 0333540003 Nipple, A106, Steel, Galvanized, Seamless, Pipe Size 2", Close Length 11"
- YMW TAPS 383160ticn Pipe Tap, 2 Inch -11-1/2, NPT
- SOCOMEC 57035012 Dead Front Fuse Holder, 690 V, 100 Amp, 2 Poles, 22 x 58 mm Fuse Size
- PLAST-O-MATIC FC150EP-029-PV Flow Control Valve, EPDM Seal, PVC, 1-1/2 Inch Size, 29 gpm
- SMC VALVES MGPM50-200Z-M9BWL Guided Cylinder
- APPLETON ELECTRIC U23X3VA13A5A9 Control Station, Polyester
Explore More
- DEVILBISS
- KEYSHAFT
- STANDARD PUMP
- WALTER SURFACE TECHNOLOGIES
- RINGSPANN
- Masonry Trowels and Tuck Pointers
- Duct Pressure Switches
- Specialty Hinges
- Paint Primer Sealers Rust Reformers
- Concrete Grabs and Slab Tongs
- DESTACO 247, 267 Series Vertical Hold Down Clamps
- ANSELL 11-948 Hyflex Highly Durable Industrial Gloves
- ANSELL 72-025 Hyflex Cut Resistant Gloves
- COLDER PRODUCTS COMPANY APC Series Coupling Bodies, Acetal
- MUELLER INDUSTRIES 90 Cast Carbon Steel Butterfly Valves
- BRADY Carded Number
- PLAST-O-MATIC BFS Series Manual Air Shut Off Valves
- MOON AMERICAN Male Dry Hydrants, With 45 Deg. Elbow
- WEG General Purpose Single Phase Motors, Evaporative Cooler, ODP
- INTERNAL TOOL 70 Series Long Length Single End Split Blanks
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN na6908r