Product Specifications:
| Bearing Inner Ring Width (b) | 41 mm |
| Bpfi Over Rolling Inner Frequency (60 Rpm) | 4.911 Hz |
| Bpfo Over Rolling Frequency On Outer Ring (60 Rpm) | 3.089 Hz |
| Brf Rotational Frequency On Rolling Element (60 Rpm) | 2.083 Hz |
| Bsf Over Rolling Frequency On Rolling Element (60 Rpm) | 4.165 Hz |
| Cage Rotational Frequency (ftf) (60 Rpm) | 0.386 Hz |
| Coefficient (f0) | 13.3 |
| Dynamic Load (c) | 147 kN |
| External Dia. (d) | 180 mm |
| Fatigue Limit Load (cu) | 6.55 kN |
| Grease Lubrication Limit Speed (n Lim) | 3800 turns/min. |
| Inside Ring External Dia. (d1) | 106.4 mm |
| Internal Dia. (d) | 85 mm |
| Max. Operating Temp. | 120° |
| Max. Shaft & Housing Fillet Radius (ra) | 2.5 mm |
| Max. Shoulder Or Dia. (da) | 167 mm |
| Mechanical Limit Speed (n) | 6200 turns/min. |
| Min. Fillet Radius (rs) | 3 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 98 mm |
| Oil Lubrication Limit Speed (n) | 4500 turns/min. |
| Outside Ring Inside Dia. (d1) | 158.4 mm |
| Radial Clearance Class | C4 |
| Reference Thermal Speed | 5300 turns/min. |
| Static Load Rating (c0) | 97 kN |
Explore Products
- MAIN FILTER INC. MF0306091 Hydraulic Filter, Glass, 10 Micron Rating, Viton Seal, 12.677 Inch Height
- MICRO 100 RSCM-040-1 Engraving Cutter, 60 Deg Included Angle, 4 mm Shank Dia, 0.1 mm Point Offset, 50 mm Overall Length, UN
- SMC VALVES CG1KBN32-13FZ-XC12 Round Body Cylinder
- NAUGATUCK GR4X625304SS Float Ball Oblong, 4 Inch Size, 1/4-20 Thread Size
- ENERPAC r5513 55 Ton Spr Ret SA 13 Stroke Cyl
- 3M 7100308249 66000140302 Unitized Mounted Point, 877025, 811, X 1/8 Inch
- ANVIL 0332502202 Nipple, SCH 40, Black, Seamless, Pipe Size 1/8", Close Length 6"
- SIOUX CHIEF 908-13161001 Reducing Coupling, 17104026, Reducing Coupling Compression 1/2 X 3/8 Poly
Explore More
- KEYSHAFT
- PRO SERIES SUMP PUMPS
- TRU-SPEC
- HESSAIRE
- KINGSWAY GROUP
- Hand Sinks and Hand Wash Stations
- Step Drill Bit Sets
- Ultrasonic Thickness Gauge
- Metal Clad Whips
- Tachometer Sensors
- DESTACO Flat Tip Bonded Neoprene Spindle Inch
- CONDOR General Purpose Gloves, Yellow/Black, Abrasion Level 3
- ANSELL 29-865 Alphatec Medium Duty Unsupported Neoprene Gloves
- ASSOCIATED SPRING RAYMOND CU1000 Gas Springs
- ANVIL 69H Series Trapeze Pipe Hangers
- WALTER TOOLS ODHT Positive Octagonal Carbide Milling Insert
- APPROVED VENDOR 1/64" Pin Dia. Grade 18-8 Stainless Steel Standard Dowel Pins
- PARKER 10 Series Couplers, Male Pipe
- WALTER TOOLS TC470 Series Solid Carbide Machine Thread Formers
- STEINER INDUSTRIES 0238 Driver Gloves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 6317c4