NTN 23036eaw33
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 74 mm |
| Coefficient (e) | 0.23 |
| Dynamic Load (c) | 1080 kN |
| External Dia. (d) | 280 mm |
| Fatigue Limit Load (cu) | 137 kN |
| Groove Width (b) | 13.24 mm |
| Hole Dia. (k) | 6 mm |
| Inside Ring External Dia. (d2) | 203.6 mm |
| Internal Dia. (d) | 180 mm |
| Lower Axial Load Coefficient (y1) | 2.95 |
| Max. Operating Temp. | 200° |
| Max. Shaft & Housing Fillet Radius (ra) | 2 mm |
| Max. Shoulder Or Dia. (da) | 269.8 mm |
| Mechanical Limit Speed (n) | 2500 turns/min. |
| Min. Fillet Radius (rs) | 2.1 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 190.2 mm |
| No. Of Lubrication Holes | 3 |
| Outside Ring Inside Dia. (d1) | 255 mm |
| Radial Clearance Class | Cn |
| Reference Thermal Speed | 2000 turns/min. |
| Static Axial Load Coefficient (y0) | 2.89 |
| Static Load Rating (c0) | 1450 kN |
| Upper Axial Load Coefficient (y2) | 4.4 |
Explore Products
- PARKER 1P4MA0037125 Pneumatic Cylinder
- AIGNEP 50861N-4 Ptc Fittings Kit 60 Pieces 4mm Size
- APPLETON ELECTRIC MLCL502TSGMT High Pressure Sodium Light Fixture, 50W
- EATON E29KJP76 Jumbo Legend Plate, 0.1 Inch H X 1/2 Inch W, Square Plate, Plastic, Yellow/Red Field
- OSG 1400102408 Thread Forming Tap, #2-56 Thread Size, 3/8 Inch Thread Lg, TiCN, H4, Bottoming
- CLEVELAND C33393 End Mill, 15/32 Inch Diameter Cutter, 4 Inch Overall Length, 2 Inch Length Of Cut
- WIHA TOOLS 28795 Insulated TorqueControl, 1, Drivers and Bits, SAE, Tool Pouch
- MERSEN FERRAZ SLR1-6/10 Fuse, 1 6/10 A, 300 VAC, 100A at 300 VAC/10kA at 125 VAC, Fast Acting
Explore More
- KEYSHAFT
- KURIYAMA
- LEGRAND
- GRAND ROCK
- BUCHER HYDRAULICS
- Label Maker Cable and Wire Markers
- Antistatic Wrist Strap Kits
- Stainless Steel Music Wire
- Concrete Patching and Repair Compounds
- Bronze Blanks, Flats, Bars, Plates and Sheet Stock
- REVCOR Propeller, 20 inch
- MEMPHIS GLOVE NXG Cotton Polyester Gloves
- RINGERS GLOVES Heavy Duty Impact Gloves
- ASSOCIATED SPRING RAYMOND TU 500 Gas Springs
- REVCOR Blower Wheels, Direct Drive, Single Inlet Forward Curve, Concave
- KERN AND SOHN Carrier Bars
- TECHNIKS End Mill Holders
- APPROVED VENDOR 14mm Pin Dia. Through Hole, Without Pin, With Head Clevis Pins
- ARC ABRASIVES Quick Change Sanding Discs
- WEG General Purpose Three Phase Motors, Right Hand Thread, TEFC
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 23036eaw33