NTN 22320eakw33c3
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 73 mm |
| Coefficient (e) | 0.34 |
| Dynamic Load (c) | 827 kN |
| External Dia. (d) | 215 mm |
| Fatigue Limit Load (cu) | 88.9 kN |
| Groove Width (b) | 13.26 mm |
| Hole Dia. (k) | 6 mm |
| Inside Ring External Dia. (d2) | 126.7 mm |
| Internal Dia. (d) | 100 mm |
| Lower Axial Load Coefficient (y1) | 1.98 |
| Max. Operating Temp. | 200° |
| Max. Shaft & Housing Fillet Radius (ra) | 2.5 mm |
| Max. Shoulder Or Dia. (da) | 201 mm |
| Mechanical Limit Speed (n) | 3100 turns/min. |
| Min. Fillet Radius (rs) | 3 mm |
| Min. Length Fro Sleeve Ce | 7 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 114 mm |
| Min. Sleeve Dia. (db) | 110 mm |
| No. Of Lubrication Holes | 3 |
| Outside Ring Inside Dia. (d1) | 186.7 mm |
| Radial Clearance Class | C3 |
| Reference Thermal Speed | 2600 turns/min. |
| Static Axial Load Coefficient (y0) | 1.93 |
| Static Load Rating (c0) | 844 kN |
| Upper Axial Load Coefficient (y2) | 2.94 |
Explore Products
- QA1 CFR12 Female Rod End Right-hand 3/4-16
- TB WOODS EP660 V-Belt, 663 Inch Belt Outside Length
- GROVE GEAR GR8600582.47 GR-HMQ860-60-H1-180-47 Right Angle Gear Reducer, 60 to 1 Ratio, 2-15/16 Inch Hollow Bore, 182-4TC NEMA Input, Cast Iron
- EATON TMR5L08120 Timing Relay, 0.6 to 60 Sec Setting, 120 VAC/VDC, 8 Pin, Dpdt Contact
- SMC VALVES VO325-005TLS Solenoid Valve, 3 Port
- SMC VALVES CDA2F40-320Z Tie Rod Cylinder
- BURNDY YCR30RG7 Reducer, Aluminum, 300-336.4 kcmil to 4/0 AWG
- DANFOSS 06924D-124 Field Attachable Hose Fittings Male Pipe Rigid, 1 1/2 in NPTF, Carbon Steel, 3.50 in Overall Length, 1.94 in Height
Explore More
- KEYSHAFT
- WINSMITH
- DECARBONATOR
- SEALEX
- IRON HORSE
- Depressed Center Wheels
- Phasing and Motor Rotation Meters
- Cable Pulling Mesh Grips
- Gas Cocks
- Roof Curb Adapters
- ML KISHIGO Contrasting Mesh Vests, Orange
- IRONCAT Welding Gloves, Elkskin Leather, Gold
- FERNCO Flexible Qwik Tees
- KEO Combined Drills And Countersinks, Bell Type, 60 Degrees Countersink Angle, Single-End Carbide
- MUELLER INDUSTRIES LF351 Iron Body Y Strainers
- LEGRAND Ground Continuity Monitoring Connector
- APPROVED VENDOR Tube Uhmw-pe 3 Inch
- MORSE CUTTING TOOLS 543 Series General Purpose Masonry Drills, Regular Helix, Carbide Tipped
- WATTS LF777SI Series Y Wye Strainers
- ZSI-FOSTER FIH Series Unvalved Plugs
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 22320eakw33c3