NTN 22226eaw33c5
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 64 mm |
| Bpfi Over Rolling Inner Frequency (60 Rpm) | 10.394 Hz |
| Bpfo Over Rolling Frequency On Outer Ring (60 Rpm) | 7.606 Hz |
| Brf Rotational Frequency On Rolling Element (60 Rpm) | 3.107 Hz |
| Bsf Over Rolling Frequency On Rolling Element (60 Rpm) | 6.213 Hz |
| Cage Rotational Frequency (ftf) (60 Rpm) | 0.423 Hz |
| Coefficient (e) | 0.25 |
| Dynamic Load (c) | 808 kN |
| External Dia. (d) | 230 mm |
| Fatigue Limit Load (cu) | 91.4 kN |
| Groove Width (b) | 13.21 mm |
| Hole Dia. (k) | 6 mm |
| Inside Ring External Dia. (d2) | 151.4 mm |
| Internal Dia. (d) | 130 mm |
| Lower Axial Load Coefficient (y1) | 2.69 |
| Max. Operating Temp. | 200° |
| Max. Shaft & Housing Fillet Radius (ra) | 2.5 mm |
| Max. Shoulder Or Dia. (da) | 216 mm |
| Mechanical Limit Speed (n) | 3600 turns/min. |
| Min. Fillet Radius (rs) | 3 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 144 mm |
| No. Of Lubrication Holes | 3.4 |
| Outside Ring Inside Dia. (d1) | 205.4 mm |
| Radial Clearance Class | C5 |
| Reference Thermal Speed | 2800 turns/min. |
| Static Axial Load Coefficient (y0) | 2.63 |
| Static Load Rating (c0) | 898 kN |
| Upper Axial Load Coefficient (y2) | 4 |
Explore Products
- LISLE LS/40750 Parking Brake Cable Remover
- ALLEGRO SAFETY 9907-HCG Grinding Air Shield Head Top, With Temperature Controller, 41.2 sq. In. Area
- HOFFMAN ASE18X12X6SSNK Pull Box, Screw Cover, 18 x 12 x 6 Inch Size
- NORTON ABRASIVES 61463687180 Sharpening File Round Edge Aluminium Oxide Medium
- SMC VALVES CDRB1BW50-270S-M9B-XN Rotary Actuator
- CH HANSON 64011 Spring Clamp With Rubber Tips, 1 Inch Size
- SMC VALVES SV1000-M1-P-X22 Interface Regulator With Gauge
- HEXARMOR 3023-L (9) Knit Gloves, Size L, ANSI Cut Level A5, 3/4, Dipped, Nitrile, Textured, Blue, 1 Pair
Explore More
- BISHOP-WISECARVER
- KEYSHAFT
- NORDFAB
- METROVAC
- MILES LUBRICANTS
- Kitchen and Wet Area Mats
- Pipe Inspection Equipment
- Portable Electric Heater Accessories
- Wire Connector Kits
- Wheel Nuts and Caps
- LOC-LINE Extended Element
- TURTLESKIN CP-400 Insider Gloves
- CONDOR Cut Resistant Gloves, Cut Level A4, Gray
- TEMPCO NHW Series Mica Insulated Nozzle Heaters
- ANVIL AS100 Series Channels, Solid
- MILLER BY HONEYWELL Vertical Lifelines
- BUNTING BEARINGS Sleeve bearings
- HOFFMAN HH05 Series Filter Fan Shrouds
- SPEARS VALVES CPVC True Union 2000 Industrial Ball Check Valve Cartridges, EPDM
- APPROVED VENDOR #10-32 Fully Threaded, Serrations Zinc Plated Grade 5 Steel Hex Head Cap Screws
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 22226eaw33c5