NTN 22213eakw33c3
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 31 mm |
| Bpfi Over Rolling Inner Frequency (60 Rpm) | 10.404 Hz |
| Bpfo Over Rolling Frequency On Outer Ring (60 Rpm) | 7.596 Hz |
| Brf Rotational Frequency On Rolling Element (60 Rpm) | 3.088 Hz |
| Bsf Over Rolling Frequency On Rolling Element (60 Rpm) | 6.175 Hz |
| Cage Rotational Frequency (ftf) (60 Rpm) | 0.422 Hz |
| Coefficient (e) | 0.24 |
| Dynamic Load (c) | 226 kN |
| External Dia. (d) | 120 mm |
| Fatigue Limit Load (cu) | 27.3 kN |
| Groove Width (b) | 7.83 mm |
| Hole Dia. (k) | 3.5 mm |
| Inside Ring External Dia. (d2) | 78.2 mm |
| Internal Dia. (d) | 65 mm |
| Lower Axial Load Coefficient (y1) | 2.79 |
| Max. Operating Temp. | 200° |
| Max. Shaft & Housing Fillet Radius (ra) | 1.5 mm |
| Max. Shoulder Or Dia. (da) | 111 mm |
| Mechanical Limit Speed (n) | 6900 turns/min. |
| Min. Fillet Radius (rs) | 1.5 mm |
| Min. Length Fro Sleeve Ce | 8 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 74 mm |
| Min. Sleeve Dia. (db) | 70 mm |
| No. Of Lubrication Holes | 3 |
| Outside Ring Inside Dia. (d1) | 107 mm |
| Radial Clearance Class | C3 |
| Reference Thermal Speed | 5300 turns/min. |
| Static Axial Load Coefficient (y0) | 2.73 |
| Static Load Rating (c0) | 224 kN |
| Upper Axial Load Coefficient (y2) | 4.15 |
Explore Products
- JOMAR VALVE 100-404SSG-LH T-100CSSG-LH Lead Free Brass Ball Valve, 2 Pcs, Threaded Connection, Locking Handle, 600 WOG, 3/4 Inch
- SMC VALVES IS10M-50-Z-A Pressure Switch
- SMC VALVES CM2C25-50Z-XC22C35 Round Body Cylinder, 25Mm Bore Size, 50 Mm Stroke Length
- SMC VALVES CDQ2A50-100DCMZ-M9NWZ Compact Cylinder, Double Acting, Single Rod, 50Mm Bore Size, 100 Mm Stroke Length
- STARRETT 93637-11-03 Band Knife Blade Coil Stock, 3/4 Inch width, Scallop Edge, 11 Ft. 3 Inch Coil
- T&S S-WH4H-NS Wrist Action Handle, With Index And Screw, 4 Inch Size, Stainless Steel, Red
- VESTIL EPC-20 Steel Vertical Plate Clamp, 2000 lb Capacity, Blue
- SMC VALVES VV5QC21-04N7SDNN0-D Manifold
Explore More
- AIR SYSTEMS INTERNATIONAL
- KEYSHAFT
- HUBBELL LIGHTING - COLUMBIA
- PRO SET
- RAPIDAIR
- Buffing Wheels
- Engine Lathes
- Grease Fittings
- High Speed Steel End Mills
- Sink Strainers
- HELICOIL Complete Gages, Metric Coarse, 4H5H
- PS DOORS Edgehalt Single Ladder Safety Gates
- CONDOR Coated Gloves, ANSI Cut Level A2, Palm Dipped, Polyurethane, White
- CONDOR Knit Gloves, Full Finger, Palm Dotted, 7 Gauge, White/Black
- MUELLER INDUSTRIES 101MBP Silent Check Valves
- APPROVED VENDOR Hex Key Elbow, 90 Degrees
- NORTH BY HONEYWELL Northflex Light Task Plus 5 General Purpose Gloves
- MORSE CUTTING TOOLS 5986 Series Square And Corner Radius End Mills
- SENSOREX Low Cost Submersion And In-Line pH/ORP Electrodes
- TUNGALOY TAOW05 Indexable Face Mills
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 22213eakw33c3