NTN 22208eaw33zz
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 23 mm |
| Bpfi Over Rolling Inner Frequency (60 Rpm) | 9.36 Hz |
| Bpfo Over Rolling Frequency On Outer Ring (60 Rpm) | 6.64 Hz |
| Brf Rotational Frequency On Rolling Element (60 Rpm) | 2.809 Hz |
| Bsf Over Rolling Frequency On Rolling Element (60 Rpm) | 5.618 Hz |
| Cage Rotational Frequency (ftf) (60 Rpm) | 0.415 Hz |
| Coefficient (e) | 0.27 |
| Dynamic Load (c) | 116 kN |
| External Dia. (d) | 80 mm |
| Fatigue Limit Load (cu) | 12.8 kN |
| Groove Width (b) | 5.38 mm |
| Hole Dia. (k) | 2.5 mm |
| Inside Ring External Dia. (d2) | 50.2 mm |
| Internal Dia. (d) | 40 mm |
| Lower Axial Load Coefficient (y1) | 2.47 |
| Max. Inside Ring Shoulder Dia. (da) | 50.2 mm |
| Max. Operating Temp. | 200° |
| Max. Shaft & Housing Fillet Radius (ra) | 1 mm |
| Max. Shoulder Or Dia. (da) | 73 mm |
| Mechanical Limit Speed (n) | 11000 turns/min. |
| Min. Fillet Radius (rs) | 1.1 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 47 mm |
| No. Of Lubrication Holes | 3 |
| Outside Ring Inside Dia. (d1) | 70.8 mm |
| Radial Clearance Class | Cn |
| Reference Thermal Speed | 8200 turns/min. |
| Static Axial Load Coefficient (y0) | 2.41 |
| Static Load Rating (c0) | 105 kN |
| Upper Axial Load Coefficient (y2) | 3.68 |
Explore Products
- LCN 4031-LD AL Surface Mounted Closer, Hydraulic, Heavy Duty, Light Duty Arm, Non-Handed
- TITAN FASTENERS NKA460H
- HUMBOLDT HM-2003E Upper Platen, Swivel Top, 4.25 Inch Size
- SPEARS VALVES 467S-626SR Special Reinforced Clamp Saddle, FPT, Buna, SS Bolt, 10 x 6 Size, PVC
- SMC VALVES MXS8-20-X9-KJV06426 Cylinder, Air Slide Table
- DYNAQUIP CONTROLS EHH25ATJE2S Automated Ball Valve, 1 Inch, 2 Way, Brass, 24-240 VAC/DC Actuator
- ECEF 560325 Drill, 3,25mm Diameter, Cobalt Content 8 Percent, High Speed Steel
- GORILLA MILL CEM716F4TIALN 71399 Carbide End Mill, 2-1/2 Inch Length, 4 Flute, TiALN Coating, Square End
Explore More
- KEYSHAFT
- GROZ
- BONEHAM
- CARCO
- IMPA CATALOGUE
- Pin Terminals
- Infrared Thermometers
- Polyethylene Pipe
- Strain Relief Grips
- Electrostatic Air Filters
- REVCOR Propeller 18 Inch
- DWYER INSTRUMENTS 651 Series Temperature Transmitters
- HELICOIL High Spiral Flute Bottoming Taps, UNF, 3B
- SUGATSUNE Wire Pull Handles
- ANVIL AS1100 Series Rigid Steel Conduit Clamps, Zinc Trivalent Chromium
- VERMONT GAGE Plus Steel Class Zz Standard Pin Gages, Inch Cabinet
- APPROVED VENDOR Zinc Plated Grade 8 Steel Flange Hex Nylon Insert Locknuts
- APPROVED VENDOR #8-32 Fully Threaded Standard Phillips/Slotted Round Zinc Plated Steel Rounded Machine Screws
- APPROVED VENDOR 1/4"-20 Headless Hex Steel Soft Socket Set Screws
- BALDOR / DODGE Polymer Sleeve EZ Kleen, Two-Bolt Flange, Solid Journal Bearings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 22208eaw33zz