NTN 2202eeg15
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 14 mm |
| Bpfi Over Rolling Inner Frequency (60 Rpm) | 6.11 Hz |
| Bpfo Over Rolling Frequency On Outer Ring (60 Rpm) | 3.89 Hz |
| Brf Rotational Frequency On Rolling Element (60 Rpm) | 2.09 Hz |
| Bsf Over Rolling Frequency On Rolling Element (60 Rpm) | 4.179 Hz |
| Cage Rotational Frequency (ftf) (60 Rpm) | 0.389 Hz |
| Coefficient (e) | 0.34 |
| Dynamic Load (c) | 7.5 kN |
| External Dia. (d) | 35 mm |
| Fatigue Limit Load (cu) | 0.08 kN |
| Inside Ring External Dia. (d1) | 19.1 mm |
| Internal Dia. (d) | 15 mm |
| Lower Axial Load Coefficient (y1) | 1.86 |
| Max. Operating Temp. | 120° |
| Max. Shaft & Housing Fillet Radius (ra) | 0.6 mm |
| Max. Shoulder Or Dia. (da) | 31 mm |
| Mechanical Limit Speed (n) | 13000 turns/min. |
| Min. Fillet Radius (rs) | 0.6 mm |
| Min. Operating Temp. | -20° |
| Min. Shoulder Dia. Ir (da) | 19 mm |
| Outside Ring Inside Dia. (d1) | 28.8 mm |
| Precision Class | Class P0 |
| Radial Clearance Class | Cn |
| Static Axial Load Coefficient (y0) | 1.95 |
| Static Load Rating (c0) | 1.75 kN |
| Upper Axial Load Coefficient (y2) | 2.89 |
Explore Products
- GROVE GEAR EL8320535.27 EL-HMQ832-20-H_-56-27 Right Angle Gear Reducer, 20 to 1 Reduction Ratio, 87 RPM Output, 3267 lb-in Torque, Aluminum
- STRANCO INC DBV-SINGLE-6-A Letter Label, 6 Inch Character Height, Indoor/Outdoor, Non-Reflective, Gothic, Black, A, Die Cut
- M. K. MORSE 175h-tak Morse 175H-TAK
- SMC VALVES MGPL25N-25-HL Compact Guide Cylinder
- MORSE CUTTING TOOLS 34506 MT3534506 Spiral Point Tap, 1-1/4 Inch - 7, 5-3/4 Inch OAL, 4 Flute, HSS, Black Oxide, H4
- WEG SSW900G1400T5E4 14419119 Soft Starter, 1400 Amp, 220-575 V, IP00 Enclosure, G Frame
- GRAINGER 4CFF6 Commercial Pressure Gauge, 0 To 30 PSI, 2 Inch Dial, Bottom, Dual
- APPLETON ELECTRIC CN125I Nipple, Bushed, Threaded Male/Hex Head Type, 2.13 Inch Diameter
Explore More
- DOTCO
- KEYSHAFT
- SPACEPAK
- RAPIDAIR
- OEMTOOLS
- Surface Protection Films
- Shovels
- Coring Bits
- Humidifiers
- KAREWEAR Finger Guard, Split Leather
- JOHN GUEST Union Elbows, Polypropylene White
- ASSOCIATED SPRING RAYMOND EP2 24 Gas Springs
- MUELLER INDUSTRIES 1603-AC Chexter Check Valves
- ANVIL AS100S Series Channels With Long Slots
- MUELLER INDUSTRIES SPECIALTY Double Disc Check Valve
- E JAMES & CO Rubber, Neoprene
- APPROVED VENDOR Zinc Chromate Grade 8 Steel Rod Coupling Nuts
- VOLKEL PEVO Hand Taps, Intermediate, DIN 352/HSS-G, Metric
- DAYTON Dry-Run Plastic Sleeve Bearings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 2202eeg15