FREE delivery on orders over €150
MICRO 100 AECM-0305-4X End Mill, 3 mm Cutter Dia., 8 mm Length of Cut, 6 mm Shank Dia.
Item: AA7MYXModel: AECM-0305-4XCross Ref: 16E458
7 In Stock
Ships within 2 days via
10.00% off
€56.91 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | End Mill |
| Corner Radius | 0.5 mm |
| Cutter Diameter | 3 mm |
| Cutting Direction | Right Hand |
| Cutting Length | 8 mm |
| Cutting Type | Center |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing/Finishing |
| End Mill Style | Corner Radius |
| End Type | Single End |
| Finish | AlTiN Coat |
| Helix Angle | 30° |
| List Number | AECM |
| Material | Carbide |
| Material Grade | Grade C2 Micro Grain |
| Milling Dia. | 3.00mm |
| Milling Dia. | 3 mm |
| No. Of Flutes | 4 |
| Overall Length | 57 mm |
| Primary Material Application | Stainless Steel, Steel, Tool And Die Steel |
| Primary Material Application Iso Code | M, P |
| Shank Dia. | 6 mm |
| Shank Type | Straight |
| Single End/double End | Single End |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.02 |
| Ship height (cm) | 0.61 |
| Ship length (cm) | 5.69 |
| Ship width (cm) | 0.61 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Model | Overall Length | Cutting Length | Corner Radius | Milling Dia. | End Mill Application | Finish | End Mill Cutting Type | Number Of Flutes | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| AECM-0101-4X | 50 mm | 4 mm | 0.1 mm | 1 mm | Roughing/Finishing | AlTiN Coat | - | - | €47.68 | |
| AECM-0102-4X | 50 mm | 4 mm | 0.2 mm | 1 mm | Roughing/Finishing | AlTiN Coat | - | - | €48.17 | |
| AECM-0202-4X | 50 mm | 5 mm | 0.2 mm | 2 mm | Roughing/Finishing | AlTiN Coat | - | - | €47.68 | |
| AECM-0205-4X | 50 mm | 5 mm | 0.5 mm | 2 mm | Roughing/Finishing | AlTiN Coat | - | - | €51.82 | |
| AECM-0402-4X | 57 mm | 11 mm | 0.2 mm | 4 mm | Roughing/Finishing | AlTiN Coat | - | - | €63.23 | |
| AECM-0405-4X | 57 mm | 11 mm | 0.5 mm | 4 mm | Roughing/Finishing | AlTiN Coat | Center Cutting | 4 | €63.75 | |
| AECM-0603-4 | 57 mm | 16 mm | 0.3 mm | 6 mm | Roughing/Finishing | Uncoated | - | - | €52.99 |
Explore Products
- DAYTON 3NLD9 Motor Use With 3xk42 3xk46 And 3xk54
- DDS 19.0538.19.52TC Rotary Shaft Oil Seal, Tc, Nitrile, 0.75 Inch ID, 1.5 Inch Od, 0.375 Inch Width
- BALDOR / DODGE 113515 TL26L075-1210 DYNA-SYNC Sprocket
- HOFFMAN A8R86HCR Metallic Enclosure No Gasket 16 Gauge
- EATON 1255A-6502 Photoelectric Sensor, Distance 100 Feet, 50 mA Max Ac, 50 mA At 264 VAC, 180-264 VAC
- WIKA 113.13.20.300.B Commercial Pressure Gauge, Liquid-Filled, 0 To 300 PSI, 2 Inch Dial, Glycerin
- BALDOR / DODGE 234574 20X51 Crown Drum XT50 MDX 3/8 Herringbone Lagging
- GRAINGER PS-CACC-234 Rectangle Stock, 0.25 Inch Thick, 4 Inch Width X 48 Inch Length, Green, Opaque
Explore More
- ADVANTECH
- BESTFLEX CONVEYOR
- KEYSHAFT
- CARCO
- EDSON
- Electronic Flowmeters
- Gas Pilot Flame Sensors
- Temperature and Pressure Relief Valves
- Roll Out Shelving
- Pipe Fitting Kits
- DESTACO 341-R Series Pull Action Latch Clamps
- DESTACO 207 Series Vertical Hold Down Clamps, Straight Base, U Bar
- ASHCROFT 1188 Low Pressure Bellow Gauges, Brass
- JOHN GUEST Swivel Male Run Tees, NPTF Thread, Acetal Gray
- ASSOCIATED SPRING RAYMOND CU1800 Gas Springs
- GROTE Bar Lamp Rectangle
- APPLETON ELECTRIC 35 Watt LED Light Fixture
- COOPER B-LINE COM Dangle Cable Supports
- ALL GEAR High Strength Accessory Cords
- BALDOR / DODGE KW Taper Lock Bushings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 AECM-0305-4X End Mill, 3 mm Cutter Dia., 8 mm Length of Cut, 6 mm Shank Dia.
€63.23 /unit