LUBESITE 305 Metal Base Grease Feeder, 2 oz. Capacity, 1/8 Inch NPT, 1 To 2 psi

LubeSite 305 grease feeder is used for keeping bearings lubricated on conveyors, fans and motors.

Features:

• This grease feeder features a dome made of polycarbonate for ensuring high-impact & high-heat resistance.
• It has an anodised aluminium base to withstand vibrations.
• It can be mounted in any position to visually inspect grease level.
• This refillable & reusable grease feeder allows immediate activation and can be used with any NLGI 0 to 4 non-separating grease.
• It can be operated at temperatures ranging from -10 to 250 degrees F.
• This grease feeder comes assembled with light and heavy springs for controlled lubrication.

Frequently Asked Questions:

Q. How is LubeSite 305 grease feeder installed?

A.

• Use the appropriate spring to provide correct grease feeding pressure and remove grease fitting from bearing housing or equipment.
• Fill the grease feeder with non-separating grease.
• If the feeder can't be screwed directly to the bearing, an extension (no longer than 6 ft of 1/4 inch OD tube) should be used.
• Screw the LubeSite assembly directly into the grease fitting hole and turn to hand-tighten.