LOVEJOY 68514452009 10S FLNG 60MM 18X4.4MM KW Sleeve Coupling Flange, S-Flex Flange, Size 10, 60 mm Bore, Cast Iron

Features:

• An S type sleeve coupling is assembled using two such units of flange and a sleeve.
• Lovejoy 68514452009 flange can be easily slipped onto standard shafts for use in power transmission applications.
• This S flange can be fixed at a particular position using two set screws aligned at 90 degrees to each other.

Frequently Asked Questions:

Q. What precautions should you take while installing Lovejoy 68514452009 sleeve coupling flange?

A.

• All components should be checked for damage & cleaned properly before installation.
• Proper sizing & torque requirements should be checked to choose the right sleeve coupling flange.

Q. How to install Lovejoy 68514452009 sleeve coupling flange?

A.

• Place the keys in the shaft keyways.
• Slide the chosen flange on both shafts over the keys and then align their faces with the shaft end.
• Tighten one set screw on a flange up to its torque value and lightly tighten the other to handle axial adjustment.
• Insert the sleeve on one flange and move the equipment together until the sleeve serrations mesh with the other flange. The flange face should just barely touch the sleeve.
• Recheck the alignment upon installation and correct it if required.
• Tighten the set screw on the loosely tightened flange.

Q. What is Lovejoy 68514452009 sleeve coupling flange made of?

A. This sleeve coupling flange is made of high-strength cast iron for strength & durability. It is also bored to size for easy fitting.