LITHONIA LIGHTING JHBL 18000LM GL WD MVOLT GZ10 50K Led High Bay 5000k 18000lm 190w 120/277v

Acuity Lithonia JHBL18000LMGLWDMVOLTGZ1050K70CRIDWHGXD LED high bay provides a high-performance LED solution in unforgiving climates & demanding areas. This completely die-cast luminaire offers maximum thermal performance of the electronics while withstanding dust, moisture & airborne contaminants to maintain increased light levels. It hangs from open trusses or extra-high ceilings at a mounting height of 40 to 60 feet. This light generally has a very high lumen output (18000 lumens) with a wide distribution of light over the work area.

Features:

• Acuity Lithonia JHBL18000LMGLWDMVOLTGZ1050K70CRIDWHGXD LED is ideal for fully replacing the conventional HID & fluorescent high bay systems.
• It is constructed of aluminium for withstanding moisture, dust & chemical exposure.
• This IP65-rated aluminium housing uses die cut rubber gasket to protect against dust and moisture.
• It has a TGIC thermoset powder coat finish with 1500 hours salt / fog rating.
• This light fixture has a precision-moulded borosilicate glass lens with a silicone rubber gasket for fully transferring the light.
• It has a built-in Bluetooth occupancy sensor with dimming photocells for changing settings using the VLP app.
• This light fixture is an A+ capable luminaire that is tested to 70 CRI (colour rendering index) at 5000 K for consistent colour appearance and out-of-the-box control compatibility.
• It can be adjusted with nLight AIR & other Acuity Controls for maximising savings and increasing sustainability.
• This fixture can operate at temperatures ranging from -40 to 149 degrees F.

Compatible Accessories:

• Wire Guards: These wire guards are fixed onto the attachment points precast on the optical housing to protect the lens from damage.
• Occupancy Sensors: These sensors can control the fixture based on motion detected near the fixture.

Standards and Approvals:

• CSA
• Design Lights Consortium (DLC)

Frequently Asked Questions:

Q. How to install this Acuity Lithonia LED high bay?

A.

• Remove the old fixture and check this fixture for any damage.
• This Acuity Lithonia LED high bay has a 3/4 inch NPS threaded hub, offering pendant, hook or loop mounting using appropriate accessories.
• Connect the fixture wiring to line wire and connect the dining driver lines as well.
• Connect Xpoint wireless controls to the Xpoint network.
• Clean the exterior using a soft clean cloth.

Q. What is the voltage rating of this Acuity Lithonia LED high bay?

A. This Acuity Lithonia LED high bay has a voltage rating of 120 to 277V. It also has a driver for 0 - 10V dimming from 100% to 10%.

Q. What are some safety points to remember while operating this Acuity Lithonia LED high bay?

A.

• Power should be turned off and the unit should be allowed to cool before installing / servicing.
• Users should wear protective equipment while handling this fixture.
• Keep combustible materials away from the fixture.
• Maintain proper ventilation.