GROVE GEAR GRL8210559.23 GRL-HMQ821-80-H1-140-23 Output Worm Gear Reducer, 2.06 Inch Distance, 547 Inch/lbs Torque, Cast Iron
Get it by Friday, Dec 19
€973.94 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| Assembly | HMQ-H1 |
| Bore Code | 23 |
| Center Distance | 2.06" |
| Frame | 140 |
| Gear Type | Worm |
| Housing Material | Cast Iron |
| Input Bore (c Face) | 7/8" |
| Input Hp @ 1750 Rpm | 38/125 hp |
| Input Keyway Size (c Face) | 3/16" x 3/32" |
| Input Rpm | 1750 RPM |
| Input Style | C Face Quill |
| No. Of Gear Reductions | 1 |
| Output Diameter | 1.438" |
| Output Key Size | 3/8" x 3" |
| Output Rpm | 21 RPM |
| Output Shaft | Hollow Bore |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Shaft Thrust Rating | 1144 |
| Output Torque | 547 lbs.-in. |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Series | GR Series |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Weight | 30 lbs. |
Shipping Info:
| Ship weight (kg) | 13.5 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Gear Type | Output Shaft Type | Max. Input Hp | Overhung Load | Gear Ratio | Output Torque | Mounting Type | Frame | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| GRL8210102.00 | Worm | - | - | - | - | 985 lbs.-in. | - | 140 | €745.65 | |
| GRL8210057.00 | Worm | Right Handed Shaft | 0.769 hp | 1385 lbs. | - | 970 lbs.-in. | Base | 56C | €1,280.11 | |
| GRL8210142.00 | - | Double Shaft | - | - | - | - | - | - | €1,323.17 | |
| GRL8210114.00 | - | Left Handed Shaft | - | - | - | - | - | - | €1,280.11 | |
| GRL8210118.00 | - | Left Handed Shaft | - | - | - | - | - | - | €1,050.98 | |
| GRL8213507.20 | - | Hollow Shaft | 1.129 hp | - | 30:1 | - | Shaft | - | €1,933.47 | |
| GRL8210121.00 | - | Right Handed Shaft | - | - | - | - | - | - | €1,262.34 |
Explore Products
- CLEVELAND C81682 0 Corner Radius End Mill, 3 Flutes, 3/8 Inch Milling Dia, 7/8 Inch Length Of Cut
- 80/20 40-4302 Inside Corner Bracket, 2 Hole, 40mm x 36mm x 40mm, Aluminum, Clear
- DIXON 3025-DA-SS Reducing Coupler, Coupler x 2-1/2 Inch Adapter, Weld Fabrication, 3 Inch Size
- PARKER 17A36A18A6FD
- HUBBELL WIRING DEVICE-KELLEMS HBTR0208SW
- HUBBELL WIRING DEVICE-KELLEMS SS309D Fitting Above Floor
- QUANTUM STORAGE SYSTEMS WR74-2154C Wire Shelving, Starter Unit, 4 Shelves, 21 x 54 x 74 Inch Size, Chrome Finish
- RWM 76-DUR-0630-R Kingpinless Plate Caster, 6 Inch Dia, 8 Inch Height, Rigid
Explore More
- HUMBOLDT
- KEYSHAFT
- WELCH
- OASE
- THE KENNEDY GROUP
- Electric Sanders
- Strut Channel Accessories
- Paint Shields and Trim Guides
- PIR Motion Sensors
- Stainless Steel Expanded Sheets
- CONDOR Coated Gloves, Full Finger, Nitrile Coating, Palm Dipped
- JOHN GUEST Plugs, Acetal Gray
- TEMPCO Hi-Density Cartridge Immersion Heaters
- TYGON 2001 Chemical Resistant Pump Tubings
- MUELLER INDUSTRIES 101MDT Silent Check Valves
- DAYTON 240VAC, Relay
- KLEIN TOOLS Crimping Jaw
- PASS AND SEYMOUR Pin And Sleeve Watertight Receptacles
- MAXI-LIFT HD Stax Low Profile Elevator Buckets
- BLICKLE HPO Series Rollers For Pallet Trucks
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR GRL8210559.23 GRL-HMQ821-80-H1-140-23 Output Worm Gear Reducer, 2.06 Inch Distance, 547 Inch/lbs Torque, Cast Iron
€973.94 /unit