FREE delivery on orders over €150
GRAINGER ZUSAVSQ70022 O-Ring, 1 Inch Inside Dia, 1 1/8 Inch Outside Dia, 75 Shore A, Black
Item: CQ3CDFModel: ZUSAVSQ70022Cross Ref: 713T10
7 In Stock
Ships within 2 days via
10.00% off
€28.45 /pkg. of 10
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | O-Ring |
| Actual Inside Dia. | 0.9" |
| Actual Outside Dia. | 1.129" |
| Actual Width | 0.07" |
| Application | Standard |
| Color | Black |
| Cross Section | 1/16" |
| Cross Section Shape | Square |
| Dash Number | 22 |
| Durometer | 75 Shore A |
| Durometer Rating | Medium Hard |
| Fda Approved | Fda Approved |
| Inside Diameter - Actual | 0.989" |
| Material | Viton |
| Metal Detectable | Metal Detectable |
| Nominal Inside Dia. | 1" |
| Nominal Outside Dia. | 1 1/8" |
| Nominal Width | 0.062" |
| O-ring Material | Viton |
| O-ring Material Compatibility | Bleach, Carbon Dioxide, Detergents, Diesel Oil, Ethanol, Fatty Acids, Gasoline, Hydraulic Oils (Petroleum), Hydrochloric Acid (37%), Kerosene, Lubricating Oils (Petroleum), Mineral Oil, Natural Gas, Nitrogen, Silicone Grease, Sulfuric Acid (Dilute), Toluene, Vegetable Oils, Water |
| Operating Temperature - Maximum | 400°F |
| Operating Temperature - Minimum | -15°F |
| Product Type | O-Ring |
| Properties | High Temperature, Resistant To Chemicals, Resistant To Oils, Resistant To Water, Resistant To Weather |
| System Of Measurement | Imperial |
| Temp. Range | -15°F to +400°F |
| X-ray Detectable | No |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Product | Model | Durometer | Metal Detectable | Color | Cross Section Shape | Material | Temp. Range | Dash Number | Actual Outside Dia. | Pkg. Qty. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PPT03304G | - | - | - | - | - | - | - | - | 1 | €93.40 | |
 |
PPTXG903G | - | - | - | - | - | - | - | - | 1 | €56.59 | |
 |
PPTXG923G | - | - | - | - | - | - | - | - | 2 | €57.92 | |
 |
PPTLS0708G | - | - | - | - | - | - | - | - | 1 | €46.47 | |
 |
PPTLS2218G | - | - | - | - | - | - | - | - | 1 | €93.02 | |
 |
PPTLS2223G | - | - | - | - | - | - | - | - | 1 | €69.34 | |
 |
PPTLS5014G | - | - | - | - | - | - | - | - | 1 | €46.47 |
Explore Products
- GRAINGER ZUSAH6X250 O-Ring, 250 mm Inside Dia, 262 mm Outside Dia, 262 mm Actual Outside Dia, Black
- LIFT-ALL 342LBX19 Sling Wire Rope 19 Feet Length 19400 Lb @ 60
- GORILLA MILL GMA516R3015 20186 Carbide End Mill 2-1/2 Inch
- DORIAN E12M-K-SCLPR-06
- AIGNEP 85240-05 Composite Plug In Tee, 5/16 Inch Tube x 5/16 Inch Stud
- GRAINGER CPB161 Cap Nut, 5/16 In - 24 Thread Size, 17/32 In Overall Ht., 1/2 In Hex Wd., Not Gr., Fine, 70000 psi TS
- ECEF 40225 Forged Drill, 2.25mm Diameter, Rolled, High Speed Steel
- NORTON ABRASIVES 77696097539 Flap Disc, Type 27, 4 1/2 Inch x 7/8 Inch, Aluminum Oxide, Vortex Rapid Prep
Explore More
- INTERMATIC
- JONARD
- KEYSHAFT
- VITEK
- KLINGERSIL C
- Label Applicators
- Bit Sets
- Rotary Vane Compressor/Vacuum Pump
- Workbench Tops
- Lumber Crayons
- FALLTECH Belly Pads with Upper Torso Connection, Tongue
- CONDOR Pigskin Leather Pearl Welding Gloves
- ML KISHIGO Economy Rainwear Set, Orange
- ASSOCIATED SPRING RAYMOND Powerline X500 Gas Springs
- APPROVED VENDOR Elbow, 45 Degrees, Galvanised
- APPROVED VENDOR Rod Steel 5/8 Inch
- KELCH Shell Mill Holder, Taper Size PSK50
- CEMENTEX USA Goggle Systems
- UNIWELD Uni-7018 SELECT Mild Steel Alloys
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GRAINGER ZUSAVSQ70022 O-Ring, 1 Inch Inside Dia, 1 1/8 Inch Outside Dia, 75 Shore A, Black
€31.61 /pack