FREE delivery on orders over €150
GRAINGER ZUSAB-PB-133 Sleeve Bearing, 28 mm Bore, 32 mm Od, 25 mm Length
Item: CQ2KYRModel: ZUSAB-PB-133Cross Ref: 786YD0
7 In Stock
Ships within 2 days via
5.00% off
€13.42 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Sleeve Bearing |
| Bore Dia. | 28 mm |
| Length | 25 mm |
| Max. Pv | 51365 lbs.-ft./sq. in-min. |
| Max. Temp. | 530°F |
| Min. Temp. | -320°F |
| Outside Dia. | 32 mm |
| Overall Length | 25 mm |
| Plain Bearing Material | PTFE Lined Steel |
Shipping Info:
| Ship weight (kg) | 0.04 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Outside Dia. | Bore Dia. | Overall Length | Max. Pv | Max. Temp. | Min. Temp. | Plain Bearing Material | Price | |
|---|---|---|---|---|---|---|---|---|---|
| ZUSAB-PB-925 | 1.688" | 1 1/2" | 1 1/4" | 51365 lbs.-ft./sq. in-min. | 530°F | -320°F | PTFE Lined Steel | €24.34 | |
| ZUSAB-PB-924 | 1.688" | 1 1/2" | 1 1/8" | 51365 lbs.-ft./sq. in-min. | 530°F | -320°F | PTFE Lined Steel | €22.81 | |
| ZUSAB-PB-923 | 1.688" | 1 1/2" | 1" | 51365 lbs.-ft./sq. in-min. | 530°F | -320°F | PTFE Lined Steel | €19.17 | |
| ZUSAB-PB-922 | 1.688" | 1 1/2" | 1/2" | 51365 lbs.-ft./sq. in-min. | 530°F | -320°F | PTFE Lined Steel | €17.56 | |
| ZUSAB-PB-927 | 1.688" | 1 1/2" | 2" | 51365 lbs.-ft./sq. in-min. | 530°F | -320°F | PTFE Lined Steel | €31.19 | |
| ZUSAB-PB-915 | 1 7/16" | 1 1/4" | 1 1/4" | 51365 lbs.-ft./sq. in-min. | 530°F | -320°F | PTFE Lined Steel | €20.38 | |
| ZUSAB-PB-916 | 1 7/16" | 1 1/4" | 1 3/4" | 51365 lbs.-ft./sq. in-min. | 530°F | -320°F | PTFE Lined Steel | €29.00 |
Explore Products
- HUBBELL WIRING DEVICE-KELLEMS MBMS13350 Receptacle, Male, Single Key, 5 A, 3 Pole, Size 1/2 Inch Npt
- LASCO 438211 Reducer Bushing 1-1/2 x 1 Inch Spigot x Fpt
- MEM CO 1/16BSPT-B3 1/2-AL Barb Fitting, Male Bspt X Barbed, 1/16 Inch Pipe Size, 25/32 Inch Overall Length
- MAIN FILTER INC. MF0008517 Interchange Hydraulic Filter, Wire Mesh, 10 Micron, Viton Seal, 3.7 Inch Height
- OSG VGM7-0085 Carbide End Mill, 7 Flutes, 5/8 Inch Milling Dia., 2 1/2 Inch Length Of Cut
- REGAL 057034JM25 Cobalt End Mill With TiN Coated, 1 Inch Dia., 10-1/2 Inch Length, 5 Flutes
- BALDOR / DODGE 232250 30X18 CR DR XT50 30X18 Crown Drum XT50
Explore More
- KEYSHAFT
- METRIC BLUE
- TOTELINE
- HILAND
- LIGHTOLIER
- Rotary Brushes and Pad Drivers
- Block and Tackle
- Hitch Pins
- Air Hose/Electrical Cord Combination Reels
- Swing Clamp Arms
- AKRO-MILS 30293 Akrobins Super Size Bins
- MILLER BY HONEYWELL Single D-Ring Body Belts, Without Pad
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 480V Delta Primary Volts, 480Y/277 Secondary Volts
- SUGATSUNE Folding Pull Handles
- ANVIL AS1000 Series EMT Conduit Clamps, Electro Galvanized
- OSG High Speed Steel Tap, Steam Oxide Finish
- APPROVED VENDOR 7/16" Pin Dia. Grade 416 Stainless Steel Standard Dowel Pins
- APPROVED VENDOR Tube End Alloy Steel Miscellaneous Weld Nuts
- VESTIL PBAR Series Plastic Barriers
- MASTER Door Lever Locksets
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GRAINGER ZUSAB-PB-133 Sleeve Bearing, 28 mm Bore, 32 mm Od, 25 mm Length
€14.13 /unit