FREE delivery on orders over €150
FASCO D228 Fan and Blower Motor, 1/50 HP, 1 Phase, 60 Hz, 115 V, 3000 RPM, 1 Speed, 3.3 Inch Diameter
Item: AC7LTLModel: D228Cross Ref: 38N532
7 In Stock
Ships within 2 days via
10.00% off
€141.45 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Blower/Fan Motor |
| Ambient Temp. | 40°C |
| Amps | 0.92A |
| Application | HVAC/R |
| Bearing Type | Sleeve |
| Body Dia. | 3 5/16" |
| Bolt Circle Dia. | 2 7/8" |
| Capacitor Required | No |
| Drive End Bearing | Sleeve |
| Duty | Air Over |
| Duty Cycle | Continuous |
| Electrical Type | Shaded Pole |
| Frame | 3.3 |
| Frame Length | 2.24" |
| Frame Material | Steel |
| Frequency | 60 Hz |
| Full Load Amps | 0.92A |
| Hp | 1/50 hp |
| Hz | 60 Hz |
| Ins. Class | Class B |
| Insulation Class | Class B |
| Lead Length | 18" |
| Length | 5.03" |
| Length Less Shaft | 3 7/16" |
| Max. Ambient Temp. | 40°C |
| Motor Application | HVAC/R |
| Motor Bearings | Sleeve |
| Motor Design | Shaded Pole |
| Motor Enclosure Design | OAO |
| Motor Frame Material | Steel |
| Motor Mounting Type | Ring, Stud |
| Motor Mounting Type | Extended Studs |
| Motor Service Factor | 1 |
| Motor Shaft Design | Flat |
| Motor Shaft Rotation | CWSE |
| Motor Shaft Rotation | Clockwise Shaft End |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Thermal Protection | Auto |
| Motor Type | Shaded Pole |
| Mounting | Stud |
| Mounting Holes | (8) #8-32 |
| Mounting Pattern | 2-7/8 x 2-7/8 |
| Mounting Stud Location | 4/Both Ends |
| Mounting Stud Pattern | 2 7/8" x 2 7/8" |
| Mounting Type | Extended Studs |
| Nameplate Rpm | 3000 RPM |
| No. Of Mounting Holes | 8 |
| No. Of Poles | 2 |
| No. Of Shafts | 1 |
| No. Of Speeds | 1 |
| No. Of Studs | 4 |
| Number Of Mounting Holes | 8 |
| Opp Drive End Bearing | Sleeve |
| Output Hp | 1/50 hp |
| Output Kw | 0.01 kW |
| Overall Length | 5" |
| Phase | 1 |
| Rpm | 3000 RPM |
| Service Factor | 1 |
| Shaft Dia. | 1/4" |
| Shaft Extension Size | 2" |
| Shaft Length | 2" |
| Shaft Type | Flat |
| Starting Method | Across The Line |
| Stud Location | Both Ends |
| Stud Pattern | 2 7/8" x 2 7/8" |
| Stud Size | #8-32 |
| Stud/base Mtg. Pattern | 2-7/8 x 2-7/8" |
| Thermal Protection | Automatic |
| Usable @ 200v | No |
| Usable @ 208v | No |
| Voltage | 115V |
| Weight | 2 lbs. |
Shipping Info:
| Ship weight (kg) | 0.9 |
| Ship height (cm) | 8.59 |
| Ship length (cm) | 20.32 |
| Ship width (cm) | 8.59 |
| HS code | 8501104020 |
| Country of Origin | MX |
Explore Products
- LIFT-ALL EN120X10 Roundsling Endless 10 Feet Length 10600 Lb Capacity
- CEMENTEX USA BPK-CUL40KF-L Coat And Pant Fan Kit, 40 Cal., L Size
- VULCAN HART 701230-A Stub, Back
- BUNTING BEARINGS EW162402 Thrust Washer, Size 1 x 1-1/2 x 1/8 Inch
- APPROVED VENDOR P1612ED Drill Bushing P Drill Size 3.5mm
- WOODHEAD 1200720424 704002D02F120 Cordset, 4 Pole, Male, 12 Feet, 22/4 Size
- EATON E2ME3800MW Molded Case Circuit Breaker, M-Frame, 500-2500A Trip Rating, 3-Pole, 800A, 600 Vac
- BROWNING RF2804PE Clutch & Brake Hardware & Kit
Explore More
- BERNZOMATIC
- DURA-SHELF
- KEYSHAFT
- ICE-O-MATIC
- ARGOS TECHNOLOGIES
- Belt Accessories
- Solenoid Valve Manifolds
- Water Heater Vents
- Twist Lock Device Accessories
- Acme Nuts
- ZIP UP White Zipper Hatch Doors
- MUELLER INDUSTRIES 1601-A Chexter Check Valves
- MUELLER INDUSTRIES LF358-N Bronze Body Y Strainers
- LEATHERHEAD TOOLS Dog-Bone Poles
- ARMSTRONG WORLD INDUSTRIES Hydronic Circulating Pumps
- HEIL QUAKER Burners
- NORTON ABRASIVES 4000 Series Bear-Tex SC Fine Grit Convolute Wheels, Non-Woven
- GLOBE SCIENTIFIC Test Tubes, Plastic
- HUB CITY Worm Gear Reducers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
FASCO D228 Fan and Blower Motor, 1/50 HP, 1 Phase, 60 Hz, 115 V, 3000 RPM, 1 Speed, 3.3 Inch Diameter
€157.17 /unit