FREE delivery on orders over €150
FASCO D190 Fan and Blower Motor, 1/40 HP, 1 Phase, 50 Hz, 230 V, 1500/1250 RPM, 3.3 Inch Diameter
Item: AC7LTQModel: D190Cross Ref: 38N536
7 In Stock
Ships within 2 days via
10.00% off
€215.56 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Blower/Fan Motor |
| Ambient Temp. | 40°C |
| Amps | 0.6/0.7A |
| Application | HVAC/R |
| Bearing Type | Sleeve |
| Body Dia. | 3 5/16" |
| Bolt Circle Dia. | 2 7/8" |
| Capacitor Required | No |
| Drive End Bearing | Sleeve |
| Duty | Air Over |
| Duty Cycle | Continuous |
| Electrical Type | Shaded Pole |
| Frame | 3.3 |
| Frame Length | 2.32" |
| Frame Material | Steel |
| Frequency | 60 Hz |
| Frequency | 50 Hz |
| Full Load Amps | 0.6/0.7A |
| Hp | 1/40 hp |
| Hz | 60 Hz |
| Ins. Class | Class B |
| Insulation Class | Class B |
| Lead Length | 12" |
| Length | 5.16" |
| Length Less Shaft | 3 1/16" |
| Max. Ambient Temp. | 40°C |
| Motor Application | HVAC/R |
| Motor Bearings | Sleeve |
| Motor Design | Shaded Pole |
| Motor Enclosure Design | OAO |
| Motor Frame Material | Steel |
| Motor Mounting Type | Ring, Stud |
| Motor Mounting Type | Extended Studs |
| Motor Service Factor | 1 |
| Motor Shaft Design | Flat |
| Motor Shaft Rotation | Clockwise Shaft End |
| Motor Shaft Rotation | CWSE |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Thermal Protection | Auto |
| Motor Type | Shaded Pole |
| Mounting | Stud |
| Mounting Holes | (8) #8-32 |
| Mounting Pattern | 2-7/8 x 2-7/8 |
| Mounting Stud Location | 4/Both Ends |
| Mounting Stud Pattern | 2 7/8" x 2 7/8" |
| Mounting Type | Extended Studs |
| Nameplate Rpm | 1500 RPM |
| No. Of Mounting Holes | 8 |
| No. Of Poles | 4 |
| No. Of Shafts | 1 |
| No. Of Speeds | 1 |
| No. Of Studs | 4 |
| Number Of Mounting Holes | 8 |
| Opp Drive End Bearing | Sleeve |
| Output Hp | 1/40 hp |
| Output Kw | 0.02 kW |
| Overall Length | 5 3/16" |
| Phase | 1 |
| Rpm | 1500/1250 RPM |
| Service Factor | 1 |
| Shaft Dia. | 1/4" |
| Shaft Extension Size | 2.3" |
| Shaft Length | 2 1/4" |
| Shaft Type | Flat |
| Starting Method | Across The Line |
| Stud Location | Both Ends |
| Stud Pattern | 2 7/8" x 2 7/8" |
| Stud Size | #8-32 |
| Stud/base Mtg. Pattern | 2-7/8 x 2-7/8" |
| Thermal Protection | Automatic |
| Usable @ 200v | No |
| Usable @ 208v | No |
| Voltage | 230V |
| Weight | 3 lbs. |
Shipping Info:
| Ship weight (kg) | 1.26 |
| Ship height (cm) | 8.59 |
| Ship length (cm) | 20.32 |
| Ship width (cm) | 8.59 |
| HS code | 8501106020 |
| Country of Origin | MX |
Explore Products
- ARO PD20R-FSS-STT-B Diaphragm Pump
- GRAINGER BULK-CS-GG10-39 Fiberglass Epoxy Laminate Sheet, 12 Inch x 24 Inch Nominal Size, 2 Inch Thick, Yellow
- NORTON ABRASIVES 66261009650 Depressed Center Wheel, Silicon Carbide, 7 Inch Wheel Dia, 5/8-11 Inch Hole Size
- EATON QA2533T4805 Bolted Pressure Switch, 2500A, 1No-1Nc, Top Feed, Fusible, 480V, 3-Pole, Three-Wire
- FLUORAMICS 9010008
- APPROVED VENDOR SB-0316-0625-12-12 Blank Stainless 316 5/8 x 12 x 12 In
- APACHE HOSE & BELTING CO INC 20104110-08 Conveyor Belt 3 ply 90 SBR Tan 8 Inch Width
Explore More
- KEYSHAFT
- WORLDWIDE ELECTRIC
- SAKRETE
- RAPIDAIR
- L9
- Routing End Mills
- Digital Pressure and Vacuum Gauges
- Plungers
- Hand Reamer
- Flange Nuts
- ANSELL 87-224 Alphatec Neoprene Natura Latex Chemical Resistant Gloves
- CONDOR General Purpose Gloves, Navy Blue/Black, Smooth Nitrile
- KRYTOX GPL 203 Series Standard Grade Grease
- KEO Long Series Metric Combined Drills And Countersinks, 60 Degrees Countersink Angle, Cobalt
- MAYHEW TOOLS Pilot Punches, Metric
- PROTO Torque Multiplier
- SPEARS VALVES CPVC Premium Pneumatic Actuated Lug Insert Butterfly Valves, Zinc Lug, FKM
- SPEARS VALVES PVC Special Reinforced Female Adapters
- WALTER SURFACE TECHNOLOGIES Fiber Disc Backing Pads
- ARLINGTON INDUSTRIES THE SCOOP Cable Entrance Plates For Existing Cable, Reversible, Non-Metallic
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
FASCO D190 Fan and Blower Motor, 1/40 HP, 1 Phase, 50 Hz, 230 V, 1500/1250 RPM, 3.3 Inch Diameter
€239.51 /unit