EATON HVX030A2-4A1B1CB Adjustable Frequency Drive, EMC H, 30 HP, NEMA Type 12, 480 V, Siemens Apogee FLN

Eaton HVX030A2-4A1B1CB adjustable frequency drive is ideal for delivering power to large industrial motors. It is used for automation and manufacturing line applications. This drive comes with EMI / RFI filters.

Features:

• This drive offers over 500000 hours of MTBF.
• It weighs up to 70% less than other designs, simplifying and speeding up the installation process.
• The serial communication interface allows the drive or bypass to control the motor.
• The line reactors have a standard efficiency of 3% for improved transient and harmonic distortion protection.
• It allows top and bottom conduit entry for ease of installation.
• It features I/O pass-through capability and upgradeable software to extend the life of the product.
• It features additional I/O and communication cards that provide plug-and-play functionality.
• The keypad can show up to three monitored parameters at the same time.
• The streamlined operating menu allows routine programming changes.
• It can accommodate a wide selection of expander boards and adapter boards.
• It has a control logic that can be powered from an external auxiliary control panel.
• The unit comes with fully rated, mechanically and electrically interlocked contacts.
• The solid-state motor overload relays protect motors when in bypass mode.
• HAND / OFF / AUTO and DRIVE / BYPASS selector on the keypad simplifies control.
• Two control power sources ensure redundancy and provide additional ride-through capability.

Standards and Approvals:

• UL
• EN 61800-3 Level H
• IEC 61800-2

Frequently Asked Questions:

Q. How to install Eaton HVX030A2-4A1B1CB?

A.

• The device's bottom cover is removed by unscrewing the screw in the centre of the panel.
• After removing the protective panel, the control terminals are exposed.
• The power and control cables are connected to the inside terminals of the adjustable frequency drive via the bottom.
• After wiring the device, the bottom panel is locked in place.

Q. Is it possible to transfer parameter settings between drives with this unit?

A. With the copy / paste keypad function, parameter settings can be transferred between drives.

Q. How is the I/O board configured?

A. The I/O board includes 6 DI, 2AI, 1 DO, 1 AO, 2 form C RO and a bypass control board installed in slots A, B and C.

Q. What is the unit's current interrupting rating?

A. This unit features a bypass circuit current interrupting rating of 65kAIC.