EATON 421AK00791B Open Circuit Piston Pump
Get it by Wednesday, Dec 24
€3,783.13 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Open Circuit Piston Pump |
| Bearing Life At Rated Pressure | 3320 hrs. |
| Code Title | Pressure Compensated/Pressure Flow Compensated |
| Continuous Allowable Case Pressure | 230 Bar |
| Control Special Features | Bleed Down Orifice |
| Controller Type | Pressure And Flow Compensator With Torque Control And .4375-20 Sae O-Ring Load Sense Port Left Side |
| Design Code | Second |
| Diagnostic Pressure Ports | .4375-20 Unf-2B Sae O-Ring Ports-Suction And Pressure-Plugged |
| Displacement | 80 cc/rev. |
| Drain Port Size And Location | 0.875-14 UNF-2B O-Ring Port, Top (28CC And 45CC) |
| Flow Compensator Setting - Maximum | 15.17 Bar |
| Fluid Cleanliness | 21/18/13 |
| Front Mounting | 2 Bolt B |
| Height | 8 3/4" |
| Housing Material | Cast Iron |
| Identification | Mark Eaton Product Number And Full Model Code On Label |
| Inlet Pressure | 210 Bar |
| Input Shaft | 13 Tooth 16/32 Spline, Shaft Extension 41.1 [1.62] |
| Input Speed At 0.8 Bar Absolute | 1800 RPM |
| Input Speed At 1.0 Bar Absolute | 2200 RPM |
| Input Speed At 2.0 Bar Absolute | 2800 RPM |
| Length | 12 1/5" |
| Main Port Size And Location | Side Ports, Suction - 2.00 SAE J518 4-Bolt Split Flange Port Standard Pressure Series (Code 61), Pressure - 1.00 SAE J518 4-Bolt Split Flange Port Standard Pressure Series (Code 61) |
| Max. Displacement Option | Standard Displacement |
| Max. Input Power | 61.7 kW |
| Max. Input Torque | 2372 lbs.-in. |
| Max. Pressure Compensator Setting | 213.7 Bar |
| Max. Recommended Operating Viscosity | 40 cST |
| Maximum Case Drain Temp. | 220°F |
| Maximum Case Pressure | 250 Bar |
| Maximum Input Speed | 3600 RPM |
| Min. Flow Compensator Setting | 12.41 Bar |
| Min. Input Speed | 600 RPM |
| Min. Pressure Compensator Setting | 206.8 Bar |
| Min. Recommended Operating Viscosity | 16 cST |
| Nominal Pressure Rating | 3335 psi |
| Paint | Blue Primer Per Spec 209-13Cd |
| Peak Pressure Rating | 3625 psi |
| Response Time | 26 ms |
| Shaft Rotation | Right |
| Shaft Seal Material | Polyacrylate |
| Theoretical Input Torque At Max. Displacement | 268 N-m |
| Torque Control Setting | 0 lbs.-in. |
| Width | 5 3/4" |
Shipping Info:
| Ship weight (kg) | 25.25 |
| Ship height (cm) | 22.23 |
| Ship length (cm) | 30.99 |
| Ship width (cm) | 14.61 |
| Country of Origin | US |
Product Variants
| Product | Model | Displacement | Price | |
|---|---|---|---|---|
 |
421AK00020B | 62.3 cc/rev. | €3,079.73 | |
 |
421AK00391B | 62.3 cc/rev. | €3,143.01 | |
 |
421AK00392B | 62.3 cc/rev. | €3,393.30 | |
 |
421AK00962B | 41 cc/rev. | €2,540.30 | |
 |
421AK01095B | 62.3 cc/rev. | €3,143.01 | |
 |
421AK00194B | 49.2 cc/rev. | €2,666.88 | |
 |
421AK00891B | 80 cc/rev. | €4,014.73 |
Explore Products
- WALTER SURFACE TECHNOLOGIES 03A121 12-24Nc Taper Sst+ Hss Hand Tap
- BUNTING BEARINGS CB081120 Sleeve Bearing, 1/2 Inch I.D., 86/125 Inch O.D., 2 1/2 Inch Length
- APOLLO VALVES 119KHAAMAA0065 Cast Iron Safety Relief Valve, 65 Psig, 2 x 3 Inch Size, 2 x FNPT
- KLEIN TOOLS 94506 Plier Set, Dipped Handle, Steel, 4 Pieces
- SMC VALVES CD85N25-180-B Round Body Cylinder, 25 mm Size, Double Acting Auto Switcher
- BALDOR / DODGE 30A50L14 TIGEAR-2 Worm Gear Speed Reducer
- E JAMES & CO 1055-1HGCTAPE Rubber Neoprene 1 Inch Thick 12 x 36 Inch
- SMC VALVES LQ2H4A-MN Connector Fitting
Explore More
- EDSAL
- KEYSHAFT
- NITE IZE
- VIKAN
- LUBRIMATIC
- Needle Scalers
- Washdown Motors
- Jet Pump Motors
- Temperature and Pressure Relief Valves
- Thermostat Cable
- ANSELL 59-001 VSB-8-HS Economic Arm Protection Sleeves
- KEO Combined Drills And Countersinks, Radius Type
- OK INDUSTRIES Manual Wire Wrap Kits
- ANVIL AS150H Series Channels With Holes
- HONEYWELL Compression Adapters
- ZSI-FOSTER FVZ RT Series, Flange Hangers with Rod Hanger Threaded Install
- SHUR-LINE Drum Funnels
- SPEARS VALVES CPVC Premium Actuated True Union 2000 Industrial Pneumatic Ball Valves, SR Thread, FKM
- FANTECH HERO Series Top Duct HRV Systems
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
EATON 421AK00791B Open Circuit Piston Pump
€3,783.13 /unit