FREE delivery on orders over €150
DORIAN CCGT-21.51-UEXL-DPC35RT Diamond Turning Insert, CCGT Insert, Left, 3/32 Inch Thick, 1/64 Inch Corner Radius
Item: CH9ZUAModel: CCGT-21.51-UEXL-DPC35RTCross Ref: 56MA60
7 In Stock
Ships within 2 days via
5.00% off
€29.03 /unit
This product can only be shipped in multiples of 5Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Turning Insert |
| Ansi Code | CCGT-21.51-UEXL |
| Application | Drilling |
| Chip Breaker | Yes |
| Chip-breaker Code | UEX |
| Chip-breaker Style | On One Side , Yes |
| Clearance Angle | 7° |
| Coating Process | CVD |
| Coolant Fed | Coolant Through |
| Corner Radius | 1/64" |
| Cutting Application | Casting, Forging, Interrupted Cuts, Uneven Surface Turning |
| Cutting Direction | Left Hand |
| Cutting Edge | Honed |
| Cutting Edge Length | 6 mm |
| Depth Of Cut | 0.012" to 0.156" |
| Features | Best For Cutting Carbon And Alloy Steel And Good For Stainless Steel, Precision Ground Insert, Tough And Impact Resistant Substrate |
| Finish-machining | Al2O3+Ticn+Al2O3+Ticn |
| General Shape | Diamond |
| Hole Type | 40° to 60° Countersink Through Hole |
| Included Angle | 80° |
| Inscribed Circle | 1/4" |
| Insert Code | CCGT21.51 |
| Insert Holding Type | 40° to 60°Countersink Hole |
| Insert Style | CCGT |
| Iso Number | CCGT-060204-UEXL |
| Manufacturer Grade | Grade DPC35RT |
| Material | Carbide |
| Material Grade-machining | Grade C5 |
| Material-machining | Carbide |
| No. Of Coolant Holes | 2 |
| No. Of Cutting Edges | 1 |
| Primary Material Application | Steel |
| Primary Material Application Iso Code | P40 |
| Rake | Positive |
| Secondary Material Application | Stainless Steel |
| Secondary Material Application Iso Code | M |
| Shape | Rhombic |
| Standards | Din 6499 |
| System Of Measurement | Fractional Inch |
| Thickness | 3/32" |
Shipping Info:
| Ship weight (kg) | 0.01 |
| Ship height (cm) | 0.24 |
| Ship length (cm) | 3.81 |
| Ship width (cm) | 4.57 |
| HS code | 7318190000 |
| Country of Origin | AT |
Product Variants
| Product | Model | Cutting Direction | Inscribed Circle | Clearance Angle | Insert Code | Insert Style | Thickness | Corner Radius | Chip-breaker Code | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
TNMG-321-UGN-DUC25UT | Neutral | 3/8" | 0° | TNMG321 | TNMG | 1/8" | 0.0156" | UGN | €15.61 | |
 |
TPGH-21.51-UEN-DPP30GT | Neutral | 1/4" | 11° | TPGH21.51 | TPGH | 0.093" | 0.0156" | UEN | €18.80 | |
 |
CCMT-32.52-PEM-DPC15HT | Neutral | 3/8" | 7° | CCMT332 | CCMT | 3/16" | 1/32" | PEM | €14.13 | |
 |
CCMT-32.51-PEF-DPC25UT | Neutral | 3/8" | 7° | CCMT331 | CCMT | 3/16" | 1/64" | Pef | €13.45 | |
 |
CCGT-21.51-UEU-DUP15VT | Neutral | 1/4" | 7° | CCGT21.51 | CCGT | 3/32" | 1/64" | UEU | €19.80 | |
 |
CCGT-32.51-UEXR-DPC35RT | Right Hand | 3/8" | 7° | CCGT331 | CCGT | 3/16" | 1/64" | UEX | €35.27 | |
|
CCGT-32.52-UEXR-DPC25UT | Right Hand | 3/8" | 7° | CCGT332 | CCGT | 3/16" | 1/32" | UEX | €35.27 |
Explore Products
- SPEC C15802073000S Compression Spring, 141.6 lbs/In Stiffness Rate, 135.56 lbs Load Capacity, Stainless Steel
- GRAINGER 12495_12_0 Stainless Steel Flat Bar, 316, 0.5 Inch Thick, 3 1/2 Inch X 12 Inch Size, Hot Rolled, Mill
- OSG 1400135600 Thread Forming Tap, 3/8 Inch - 16 Thread Size, 3/4 Inch Thread Lg, Bright, H10, Semi-Bottoming
- SPEARS VALVES 95051H100-005 Diaphragm Valve, Flanged, EPDM, PTFE, Air To Air, 80 PSI, 1/2 Size, PVC
- REGAL 029198AS85 Hand Tap, M20 x 1.5 Size, D6 Limit, 4 Flutes, Taper, Metric, Left Hand With TiCN Coating
- SMC VALVES VND200D-15A-X108 Media Valve, 1/2 Port Size, 2 Way
- SPEEDAIRE PN10D237032G Pad 3
Explore More
- KEYSHAFT
- Pump Shaft Seals
- Tapered Roller Bearing Cups
- Filter Media Pads
- Fiberglass Sheets Film and Flat Stock
- Flexible Strip Heaters
- CONDOR Chainmail Cut Resistant Gloves
- CONDOR General Purpose Gloves, Black, Rough Latex
- DESTACO 375-M Series Pull Action Latch Clamps
- FERNCO 1059 Series Stock Couplings
- ANVIL AS200H3 Series Channels With Holes on 3 Sides
- VESTIL LPBP Series Light Pole Base Protectors
- JUSTRITE Type I Faucet Safety Cans For Laboratories, Red
- HOBART Plasma Cutters
- MORSE CUTTING TOOLS 2047 Series Plug Taps, Spiral Point
- SPEC Metric Compression Springs, Stainless Steel, 13.5 mm Outside Dia.
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DORIAN CCGT-21.51-UEXL-DPC35RT Diamond Turning Insert, CCGT Insert, Left, 3/32 Inch Thick, 1/64 Inch Corner Radius
€30.55 /unit