FREE delivery on orders over €150
DDS 28.5741.276.35SC Rotary Shaft Oil Seal, Sc, Nitrile, 1.125 Inch ID, 1.625 Inch Od, 0.25 Inch Width
Item: CP2ZFWModel: 28.5741.276.35SCCross Ref: 60ZP75
7 In Stock
Ships within 2 days via
5.00% off
€20.12 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Shaft Oil Seal |
| Case Coating | None |
| Contact Type | Contact Seal |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 M/S And 55 HRC @ 10 M/S |
| Inside Dia. | 1 1/8" |
| Lip Material | Nitrile Rubber |
| Max. Pressure | 7 psi |
| Max. Temp. | 250°F |
| Min. Temp. | -40°F |
| No. Of Lips | 1 |
| Outside Dia. | 1 5/8" |
| Overall Width | 1/4" |
| Seal Design | SC |
| Seal Type | Single Lip Seal |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.45 |
| Ship height (cm) | 0.64 |
| Ship length (cm) | 4.13 |
| Ship width (cm) | 4.13 |
Product Variants
| Model | Inside Dia. | Overall Width | Outside Dia. | Lip Material | Seal Type | Seal Design | Max. Pressure | No. Of Lips | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 10012010SC | 100 mm | 10 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €45.55 | |
| 10012012SC | 100 mm | 12 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €42.99 | |
| 10012013SC | 100 mm | 13 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €45.55 | |
| 10012510SC | 100 mm | 10 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €46.11 | |
| 10012512SC | 100 mm | 12 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €27.53 | |
| 10012513SC | 100 mm | 13 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €26.34 | |
| 10012515SC | 100 mm | 15 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €26.34 |
Explore Products
- APPROVED VENDOR 60RC111N010012 Reducing Coupling 1 x 1/2 Inch 316 Stainless Steel
- SMC VALVES CKG1B63-75YABDZ Clamp Cylinder
- SMC VALVES NCGBN50-4800 Round Body Cyinder, 3/4 To 2-1/2 Inch Bore Range
- 3M 7010318276 75030270500 / 91851 / 117024 Film Transparent, 24 Inch X 50 Yd
- PARKER 1/2 X 1/4 CD-S 90 Deg. Street Elbow, Steel, 1/2 Inch X 1/4 Inch Pipe, Male Nptf X Female Npt
- PARKER 07G33A18A4FD
- LOVEJOY 68514442312 Spring Loaded V-Belt Pulley, Bore 1-1/8 In, Length 6.44 In
- MAIN FILTER INC. MF0714570 1275226 Interchange Hydraulic Filter, Glass, 10 Micron Rating, Viton Seal, 6.18 Inch Height
Explore More
- BOWMAN MFG CO
- KEYSHAFT
- PURTEST
- POLAR PLUS
- KODIAK CONTROLS
- Pallet Positioners and Level Loaders
- Weld Studs
- Indicating Transmitters
- Electric Unit Heater Accessories
- Linear Guide Rails
- MEMPHIS GLOVE Pigskin Leather Palm Gloves
- DESTACO 324-M Series Pull Action Latch Clamps
- DWYER INSTRUMENTS 1211 Series Slack Tube Manometers
- ANVIL 260R Series Reduced Hanger Rod Clevis Hangers
- ANVIL AS560EH Series Channel With Elongated Holes
- APOLLO VALVES 86C-600 Series 3 Piece Full Port Butt Weld Ball Valves
- GATES Round Tooth Timing Belts, 8MM Pitch
- BROWNING VTBE 100 Series Intermediate Duty Tapped Base Pillow Block Mounted Ball Bearings
- FATH INC Clips
- SPEC Metric Compression Springs, Stainless Steel, 9.6 mm Outside Dia.
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DDS 28.5741.276.35SC Rotary Shaft Oil Seal, Sc, Nitrile, 1.125 Inch ID, 1.625 Inch Od, 0.25 Inch Width
€21.18 /unit