FREE delivery on orders over €150
Product Specifications:
| Item | Shaft Oil Seal |
| Case Coating | None |
| Contact Type | Contact Seal |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 M/S And 55 HRC @ 10 M/S |
| Inside Dia. | 175 mm |
| Lip Material | Nitrile Rubber |
| Max. Pressure | 7 psi |
| Max. Surface Speed | 999 mps |
| Max. Temp. | 250°F |
| Min. Temp. | -40°F |
| No. Of Lips | 2 |
| Outside Dia. | 200 mm |
| Overall Width | 15 mm |
| Seal Design | TC |
| Seal Type | Dual Lip Seal |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.9 |
| Ship height (cm) | 1.5 |
| Ship length (cm) | 20 |
| Ship width (cm) | 20 |
Product Variants
| Model | Inside Dia. | Outside Dia. | Overall Width | Lip Material | Seal Type | Seal Design | Max. Pressure | No. Of Lips | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 10011512TC | 100 mm | 115 mm | 12 mm | Nitrile Rubber | Dual Lip Seal | TC | 7 psi | 2 | €40.56 | |
| 10012010TC | 100 mm | 120 mm | 10 mm | Nitrile Rubber | Dual Lip Seal | TC | 7 psi | 2 | €62.30 | |
| 10012012TC | 100 mm | 120 mm | 12 mm | Nitrile Rubber | Dual Lip Seal | TC | 7 psi | 2 | €45.60 | |
| 10012017TC | 100 mm | 120 mm | 17 mm | Nitrile Rubber | Dual Lip Seal | TC | 7 psi | 2 | €62.30 | |
| 10012510TC | 100 mm | 125 mm | 10 mm | Nitrile Rubber | Dual Lip Seal | TC | 7 psi | 2 | €61.25 | |
| 10012512TC | 100 mm | 125 mm | 12 mm | Nitrile Rubber | Dual Lip Seal | TC | 7 psi | 2 | €62.41 | |
| 10012513TC | 100 mm | 125 mm | 13 mm | Nitrile Rubber | Dual Lip Seal | TC | 7 psi | 2 | €51.25 |
Explore Products
- SEALMASTER NPL-16T LO Pillow Block Bearing, 2 Bolt, 1 Inch Dia, Skwezloc Locking, Cut Down Felt Seal
- APPROVED VENDOR 2HET3 Mounting Kit, Safety Handrail System, 3/8 in Overall Ht, 3/8 in Overall Wd
- REGAL 015186AS88 Extension Hand Tap, 9/16-18 Size, H3 Limit, 4 Flutes, 6 Inch Length With TiALN Coating
- TSUBAKI RS08-1A35
- THYSSENKRUPP MATERIALS CUREC00302 Flat Copper 110 1/4 x 1/2 Inch 1 Feet
- APPLETON ELECTRIC MLLEDW23G5BU2 Led Light Fixture, 2000 Lumens, 1 Inch Hub Size, 26W, Wall Mount
- OSG 53000008 Indexable Square End Mill, 1 1/4 Inch Max. Cutting Dia, Weldon, 1-1/4 Inch Shank Dia
- LEESON 056C17D2099 S113 / 56C17D2099L General Purpose Motor, 0.50 HP, 1 Phase, 60 Hz, 115/230V, 1800 RPM
Explore More
- KEYSHAFT
- KUNKLE
- LEESON
- SUMNER
- SUPERIOR
- Signal Conditioner
- Plastic Square Rods
- Saddle Clamps
- PLC Displays and Touch Panels
- Metal Detectable Markers and Pens
- ALLEGRO SAFETY Tyvek Maintenance Free Hoods
- DWYER INSTRUMENTS TID Series Temperature/Process Indicators
- RUD CHAIN ABA Lifting Points For Welding
- ANVIL AS200STS Series Welded Channels
- DAYTON 5V Banded V-Belts
- HUBBELL WIRING DEVICE-KELLEMS Support Grips, Single Eye
- METRO PQ Series, Qwik SLOT Shelf Posts
- BALDOR MOTOR SCR Drive Permanent Magnet Motors
- EATON CS-SP-5 Series Split Core Current Sensors
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DDS 17520015TC Rotary Shaft Oil Seal, Tc, Nitrile, 175 mm ID, 200 mm Od, 15 mm Width
€98.10 /unit

