DAYTON 4YU37 Pump Sewage/trash 3 Hp
Get it by Wednesday, Dec 24
10.00% off
€2,784.39 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Sewage/Trash Centrifugal Pump |
| Amps | 13.4A |
| Bearing Type | Ball |
| Best Efficiency Flow Range @ Head | 70-94 GPM @ 33-24 Ft |
| Best Efficiency Flow Rate @ Head | 55 GPM @ 39 ft. |
| Best Efficiency Head | 39 ft. |
| Compatible Discharge Pipe Size | 2" |
| Compatible Intake Pipe Size | 2" |
| Compatible Pipe Size | 2" |
| Compatible With Media Type | Sewage |
| Connection Type | NPT |
| Discharge Type | NPT |
| Drain Plug Size | 3/8" |
| Duty | Continuous |
| Duty - Pumps | Continuous |
| Duty Cycle | Continuous |
| Feet Of Head (minimum) | 2 ft. |
| Flow Rate @ 100 Ft Of Head (maximum) | Not Applicable |
| Flow Rate @ 2 Ft. | 160 GPM |
| Flow Rate @ 20 Ft Of Head (maximum) | 110 GPM |
| Flow Rate @ 20 Ft. | 105 GPM |
| Flow Rate @ 25 Ft. | 100 GPM |
| Flow Rate @ 30 Ft. | 78 GPM |
| Flow Rate @ 39 Ft. | 55 GPM |
| Flow Rate @ 40 Ft Of Head (maximum) | 54 GPM |
| Flow Rate @ 40 Ft. | 54 GPM |
| Flow Rate @ 50 Ft. | 30 GPM |
| Flow Rate @ 80 Ft Of Head (maximum) | Not Applicable |
| Flow Rate Of Water @ 25 Ft. | 100 GPM |
| Flow Rate Of Water @ 50 Ft. | 30 GPM |
| For Media Type | Sewage |
| Frame | 56J |
| Frequency | 60 Hz |
| Gpm Of Water @ 2 Ft. | 160 GPM |
| Gpm Of Water @ 2 Ft. Of Head | 160 |
| Gpm Of Water @ 20 Ft. | 105 GPM |
| Gpm Of Water @ 30 Ft. | 78 GPM |
| Gpm Of Water @ 40 Ft. | 54 GPM |
| Height | 8 2/3" |
| Housing Material | Cast Iron |
| Hp | 3 hp |
| Hp - Pumps | 3 hp |
| Impeller Material | Stainless Steel |
| Impeller Type | Non Clog |
| Includes | Strainer |
| Inlet Pressure | 25 psi |
| Inlet Size | 2" |
| Inlet/outlet | 2" |
| Length | 21 1/3" |
| Manufacturer Warranty Length | 1 yr. |
| Max. Case Pressure | 60 psi |
| Max. Dia. Solids - Pumps | 1" |
| Max. Feet Of Head | 60 ft. |
| Max. Flow Rate | 160 GPM |
| Max. Head | 60 ft. |
| Max. Head - Pumps | 60 ft. |
| Max. Media Temp. | 160°F |
| Max. Solid Dia. | 1" |
| Max. Specific Gravity | 1 |
| Max. Suction Lift | 20 ft. |
| Maximum Flow Rate @ 40 Feet Of Head | 54 GPM |
| Maximum Flow Rate @ 60 Feet Of Head | 0 GPM |
| Media Type | Sewage |
| Min. Flow Rate | 30 GPM |
| Min. Head | 2 ft. |
| Min. Media Temp. | 40°F |
| Motor Ambient Temp. | 104°F |
| Motor Ambient Temperature (maximum) | 104°F |
| Motor Ambient Temperature (minimum) | 104°F |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Frame Designation | 56J |
| Motor Type | Capacitor Start |
| Npshr | 25 psi |
| Operation | Manual |
| Outlet Size | 2" |
| Outlet Type | NPT |
| Overall Height | 8.7" |
| Overall Length | 21.3" |
| Overall Width | 8 3/5" |
| Overload Thermal Protection | No |
| Phase | 1 |
| Port Rotation | None |
| Port Rotation - Pumps | No |
| Priming | Self Priming |
| Pump Housing Material | Cast Iron |
| Pumping Application | Clear Or Gray Water, Irrigation, Liquid Transfer, Sewage Treatment |
| Requires Control Panel | Yes |
| Rpm | 3450 RPM |
| Rpm (maximum) | 3450 RPM |
| Screw Finish | Zinc Plated |
| Seal Material | Buna N, Carbon, Ceramic |
| Seal Type | Mechanical |
| Self Priming | Yes |
| Self-priming | Yes |
| Service Factor | 1 |
| Shaft Material | Stainless Steel |
| Solid Diameter (maximum) | 1" |
| Specific Gravity | 1 |
| Specific Gravity (maximum) | 1 |
| Submersible | No |
| Voltage | 230V AC |
| Volute Material | Cast Iron |
| Wetted Material | Buna N, Carbon Ceramic, Cast Iron, Stainless Steel |
| Width | 8 3/5" |
Shipping Info:
| Ship weight (kg) | 42.3 |
| Ship height (cm) | 41.15 |
| Ship length (cm) | 72.39 |
| Ship width (cm) | 39.88 |
| HS code | 8413702015 |
| Country of Origin | IN |
Explore Products
- CLE-LINE C22853 Jobber Length Drill Bit, 5.50 mm Size, 93 mm Overall Length
- EATON XTAR018C21RD001 Reversing Electronic Motor Starter, 18 A, 12 Vdc, 2No-2No, C Frame, 45 mm, 0.6-1 A
- FANTECH 412261 Fan Grille Without Light, 6 Inch Duct, 7 Inch Dia., 11W
- ARROW FASTENER RL03SR 26D Door Lever Lockset, Grade 2, Flat With Return, Satin Chrome
- KEO 53534 Drill/Countersink 100 deg 3/4 Inch D Cobalt
- IPS W8900HACP Valve, With Solder
- FOUNTAINHEAD 190452 Smith Performance Sprayer, No Leak, Cleaning And Restoration
- MCR SAFETY 92752PUS Cut-Resistant Glove, S, Ansi Cut Level A2, Palm, Dipped, Polyurethane
Explore More
- GLOBAL WATER
- HYDE
- KEYSHAFT
- MEASURETEK
- LAVI
- Fan and Limit Controls
- Fast Acting Midget Fuses
- Cable Bits
- Definite Purpose Magnetic Contactors
- Socket Accessories
- SHARPE VALVES Forged 316L Stainless Steel Gate Valve, Socket Weld
- RINGERS GLOVES Heavy Duty Impact Gloves
- RINGERS GLOVES Light Duty Liner Cut Resistant Gloves
- GLOBE SCIENTIFIC Jars, Wide Mouth, 120 mm Opening
- ABB S202 Frame Circuit Breaker
- WOODHEAD 120067 Series Cordset
- THOMAS & BETTS 053 Gland Nuts
- CARRIER Fan Motors
- ANVIL AS500EHBTB Series Welded Channel Elongated Holes
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 4YU37 Pump Sewage/trash 3 Hp
€3,093.77 /unit