DAYTON 4HU75 Effluent Pump, 1/2 HP, 79 ft Max. Head, 110V AC
Get it by Thursday, Dec 25
10.00% off
€1,458.99 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Effluent Pump |
| Alarm Included | No |
| Amps | 11.9A |
| Base Material | Cast Iron |
| Body Dia. | 12 3/16" |
| Body Material | Cast Iron |
| Cord Length | 20 ft. |
| Cord Length - Pumps | 20 ft. |
| Discharge | 2" |
| Discharge Dia. | 2" |
| Discharge Size | 2" |
| Duty | Intermittent |
| Duty Cycle | Intermittent |
| Flow Rate @ 10 Ft. | 76 GPM |
| Flow Rate @ 10 Ft. Of Head | 76 GPM |
| Flow Rate @ 15 Ft. | 70 GPM |
| Flow Rate @ 15 Ft. Of Head | 70 GPM |
| Flow Rate @ 20 Ft. | 66 GPM |
| Flow Rate @ 20 Ft. Of Head | 66 GPM |
| Flow Rate @ 40 Ft. | 47 GPM |
| Flow Rate @ 40 Ft. Of Head | 47 GPM |
| Flow Rate @ 60 Ft. | 25 GPM |
| Flow Rate @ 60 Ft. Of Head | 25 GPM |
| Frequency | 60 Hz |
| Handle | Yes |
| Housing Material | Cast Iron |
| Hp | 1/2 hp |
| Impeller Material | Polypropylene |
| Impeller Material - Pumps | Polypropylene |
| Input Phase Ac | 1 |
| Max. Dia. Solids | 3/4" |
| Max. Head | 79 ft. |
| Max. Head - Pumps | 79 ft. |
| Max. Liquid Temp. | 104°F |
| Min. Sump Pit Dia. | 18" |
| Min. Water Depth | 18" |
| Minimum Water Depth | 18" |
| Overall Height | 16 3/4" |
| Phase | 1 |
| Pump Body Material | Cast Iron |
| Rpm | 3450 RPM |
| Shaft Seal Material | Nitrile Rubber, Silicon Carbide |
| Switch Actuation | No Switch Included |
| Switch Electrical Connection | No Switch Included |
| Switch Type - Pumps | No Switch Included |
| Top Material | Cast Iron |
| Voltage | 120V AC |
| Width At Widest Point | 12 1/6" |
Shipping Info:
| Ship weight (kg) | 35.08 |
| Ship height (cm) | 42.55 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | CN |
Explore Products
- GROVE GEAR R8572016.00 Quill Input Inline Helical Reducer
- LINN GEAR 50a34 Sprocket, 6.774 Inch Pitch Diameter, .750 Inch Stock Bore
- GRAINGER TC060-2 X 60YD General Purpose Masking Tape, 60 Yard Length, Yellow
- GRAINGER 202-001021 Square End Mill, Carbide, Single End, 1/16 Inch Milling Dia, 2 Flutes
- TITAN FASTENERS LBA03024
- GRAINGER 18H1.75-12 Carbon Steel Hex Bar, 1 3/4 Inch Hex Width, 12 Inch Overall Length
- SCOTSMAN 02-3518-01 Manifold
- CONEX BANNINGER MG5270S0220000 Slip Coupling, 22mm Size
Explore More
- KEYSHAFT
- LAMP
- DIAMOND GROUND PRODUCTS
- HAP SYSTEM
- ROXBURGH
- Motion Control Couplings
- Voice Data Connectors
- HID Fixture Reflectors
- Indicator Holders Bases and Stands
- Cup and Lid Dispensers
- CONDOR Knit Gloves, Full Finger, Full Dotted, 7 Gauge, Orange
- PROTO Impact Socket, 1/4 Inch, Metric, Forged Alloy Steel, Spline Hex
- FERNCO 3000 Proflex Series Couplings
- VIBCO VMC Series Electric Vibrators
- GLOBE SCIENTIFIC Diamond RealSeal Square HDPE Bottles, Wide Mouth
- BURNDY Cabelok Crimpit Series Compression Connectors
- WRIGHT TOOL 1/2 Inch Drive Round Head Ratchets
- CEMENTEX USA Metric Hex Impact Sockets
- BOSTON GEAR 10 Transverse Diametral Pitch Right Hand Steel Hardened Helical Gears
- MICRO 100 Corner Radius, End Mills, 4 Flute, Variable Helix
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 4HU75 Effluent Pump, 1/2 HP, 79 ft Max. Head, 110V AC
€1,621.11 /unit