DAYTON 1UHH4 Line Voltage Control Cool Analog

Dayton 1UHH4 line volt mechanical thermostat monitors and controls the temperature of HVAC systems requiring direct electrical power. It is used for heating, ventilation and refrigeration applications. This unit must not be used in potentially dangerous locations such as explosive / flammable / chemical-laden areas or wet environments.

Features:

• Dayton 1UHH4 line voltage control is compatible with single-stage systems owing to the SPST switch.
• This unit is integrated with stainless steel sensing elements to withstand corrosive conditions.
• It allows easy wall & surface mounting and has a polished steel enclosure for enhanced durability.
• It is configured with an analog display for ease of reading.
• It has an in-built bimetal or air-coil sensor to regulate & monitor the ambient air temperature.

Standards and Approvals:

• CUL
• UL
• NEMA 1

Frequently Asked Questions:

Q. How to install this thermostat?

A.

• Install this unit 5 to 6 feet above the floor in order to expose it to the average temperature of the controlled space.
• Four mounting holes are located at the rear of the case.

Q. What are the safety points to consider while using this thermostat?

A.

• Take note the grounding information and the other equipment associated with it.
• The electrical ratings of the thermostat conform to the power source and the loads being controlled. Therefore, the exceeding load ratings should be handled with a suitable relay or motor starter.
• This unit is only designed for fixed installation.

Q. What is the operating temperature of this thermostat?

A. This thermostat has an operating temperature range of 30 degrees to 110 degrees Fahrenheit.