CONDOR USA SK-R3/16 Thermal Overload Block, 10 To 16 A

Features:

• Condor SK-R3/16 3-Phase thermal overload block protects the equipment by cutting power if it draws excessive current for an extended time.
• It can be adjusted to the desired current rating ranging from 10 to 16A.
• This Condor SK-R3/16 thermal overload block has maximum voltage rating of 600VAC.
• Raptor Supplies also offers Condor SK-R3/10 thermal overload having current rating range from 6.3 to 10A.

Compatible Accessories:

• Condor MDR3 Series Pressure Switches: Condor SK-R3/16 thermal overload blocks are used to replace old, worn-out or faulty thermal overload parts of these pressure switches.

Standards and Approvals:

• ISO 9001:2008

Frequently Asked Questions:

Q. How do you adjust a Condor MDR3 Series pressure switch?

A.
• Remove the casing of the pressure switch after disconnecting it from the equipment.
• Turn the yellow disc on top of the thermal overload block to the desired current ratings.
• The cut-in & cut-out pressure can be set by turning the calibrating screw on the relay clockwise (for increasing) or anti-clockwise (for decreasing).
• The difference between cut-in & cut-out pressure or differential pressure can be adjusted using the screw next to the calibration screw.
• Users can also replace old, faulty or worn-out thermal overload blocks, unloader valves & other parts.
• Now that the pressure switch is set up, put the casing back on and connect it to the desired application.

Q. What is the use of a thermal overload block?

A. The thermal overload block protects the application from damage in case of a short circuit, over-load or overheating. Generally, the thermal overload relay gets activated by sensing heat caused by high current flow.