FREE delivery on orders over €150
CLEVELAND C83546 Ball End Mill, 4 Flutes, 5/16 Inch Milling Dia, 4 Inch Overall Length
Item: CQ9ECJModel: C83546Cross Ref: 33GL73
7 In Stock
Ships within 2 days via
13.00% off
€89.13 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 1 5/8" |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | Titanium Aluminum Nitride Coating |
| Finish-machining | TiAlN |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 30° |
| List Number | CEM-SE-4B-TA |
| Material | Carbide |
| Material Application | Cast Iron, Carbon Steel, Alloy Steel, Stainless Steel |
| Material Grade-machining | General Purpose |
| Material-machining | Carbide |
| Milling Dia. | 5/16" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 4 |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 4" |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P, M |
| Shank Dia. | 5/16" |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Single End/double End | Single End |
| Spiral Direction | Right Hand |
| Stainless Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.06 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 10.49 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Material | Milling Dia. | Cutting Length | Primary Material Application Iso Code | Shank Dia. | Material-machining | Finish-machining | Helix Angle | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C60974 | Carbide | 1" | 3" | N, P, K | 1" | Carbide | Bright (Uncoated) | 30° | €806.09 | |
 |
C80974 | Carbide | 1" | 3" | K, P, M | 1" | Carbide | TiAlN | 30° | €943.19 | |
 |
C60972 | Carbide | 1" | 1 1/2" | N, P, K | 1" | Carbide | Bright (Uncoated) | 30° | €520.48 | |
|
C80972 | Carbide | 1" | 1 1/2" | K, P, M | 1" | Carbide | TiAlN | 30° | €575.44 | |
|
C60973 | Carbide | 1" | 2 1/4" | N, P, K | 1" | Carbide | Bright (Uncoated) | 30° | €728.07 | |
|
C80956 | Carbide | 1/2" | 1" | K, P, M | 1/2" | Carbide | TiAlN | 30° | €131.19 | |
|
C60956 | Carbide | 1/2" | 1" | N, P, K | 1/2" | Carbide | Bright (Uncoated) | 30° | €108.58 |
Explore Products
- EATON D3RF3T Ice Cube Full Featured General Purpose Relay, 10A, 11 Pin, 3Pdt Contact, 24 VAC V Coil
- VERMONT GAGE 371180050 Plug Gage Assembly, Go/NoGo, 1 5/16-20 Un, 2A
- MACROMATIC THS-1654D-02 Time Delay Relay, 12-125 VDC, 1A Normally Open
- APPROVED VENDOR PT8010NZ Drill Bushing Type Headless Press Fit Drill Size 57/64 In
- SMC VALVES MXS16L-50A Guided Cylinder, 16 mm Size, Double Acting Auto Switcher
- PEER CHAIN 17777 Roller Chain, Heavy Pitch, 50 Feet Length
- YSI YPM260 Reagent, Tablet
- PARKER 6-6 FBZ-B Compression Fitting, Single Ferrule Compression, 3/8 Inch Size, Brass
Explore More
- KEYSHAFT
- Floor Machine Pads
- Hand Truck Accessories
- Hand Dryers
- Critical Area Vacuums
- Gouging Electrodes
- CONDOR Coated Gloves, ANSI Abrasion Level 4, Rough Nitrile
- DESTACO 7-101, 7-58, 7-59, 7-60 Heavy Duty Cam Action Series
- CONDOR Coated Gloves, Palm Dipped, Latex, Kevlar, 10 Gauge
- DESTACO 375-M Series Pull Action Latch Clamps
- LUMAPRO Hand Lamp Cord Reels
- MILLER-SMITH EQUIPMENT Heavy Duty Regulator
- REES Legend Plates
- HUMBOLDT Deep Separator Pans, Brass
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C83546 Ball End Mill, 4 Flutes, 5/16 Inch Milling Dia, 4 Inch Overall Length
€102.45 /unit