FREE delivery on orders over €150
CLEVELAND C83534 0 Ball End Mill, 4 Flutes, 15/64 Inch Milling Dia, 2.5 Inch Overall Length
Item: CQ9DZFModel: C83534Cross Ref: 33GL61 / 0
7 In Stock
Ships within 2 days via
10.00% off
€55.38 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 3/4" |
| Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | Titanium Aluminum Nitride Coat |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 30° |
| Material | Carbide |
| Material Application | Cast Iron, Carbon Steel, Alloy Steel, Stainless Steel |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 0.2344" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 4 |
| Overall Length | 2 1/2" |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P, M |
| Shank Dia. | 1/4" |
| Shank Type | Straight |
| Spiral Direction | Right Hand |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.03 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.2 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Material | Overall Length | Shank Dia. | Helix Angle | Number Of Flutes | List Number | Cutting Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C60974 | 1" | Carbide | 6" | 1" | 30° | 2 | - | 3" | €966.12 | |
 |
C80974 | 1" | Carbide | 6" | 1" | 30° | 2 | - | 3" | €1,130.47 | |
 |
C60972 | 1" | Carbide | 4" | 1" | 30° | 2 | - | 1 1/2" | €633.30 | |
|
C80972 | 1" | Carbide | 4" | 1" | 30° | 2 | - | 1 1/2" | €689.68 | |
|
C60973 | 1" | Carbide | 5" | 1" | 30° | 2 | - | 2 1/4" | €872.63 | |
|
C80956 | 1/2" | Carbide | 3" | 1/2" | 30° | 2 | - | 1" | €159.63 | |
|
C60956 | 1/2" | Carbide | 3" | 1/2" | 30° | 2 | - | 1" | €132.10 |
Explore Products
- CLEVELAND C33041 0 High Speed Steel End Mill 13/32 Inch D 1 Inch Cut L
- LINN GEAR 50c28 Sprocket, 5.582 Inch Pitch Diameter, .750 Inch Stock Bore
- HAMMOND 1435MS16O Pushbutton Enclosure, 12 Holes, 22mm, 12 x 9 x 3 Inch Size, Wall Mount
- USA SEALING BULK-PS-UHMWB-416 Rectangle Stock, 2 Feet Length, 2 Inch Width, 1 Inch Thick
- STA-KON 220015 Insulation Piercing Magnet Wire Splice, Length 1.50 Inch
- GATES 1115M28
- GRAINGER 17900_48_0 Stainless Steel Flat Bar, 304, 1.5 Inch Thick, 2 1/2 Inch X 4 Ft Size, Hot Rolled, Mill
- DEHN 745115 Eas Device, For Junction Box
Explore More
- KEYSHAFT
- STENNER
- RIP TIE
- AMANA
- PEABODY ENGINEERING
- Squeegees
- AC Gearmotors
- Elbow Knee and Ankle Supports
- Structural Bolts
- Definite Purpose Motors
- LOUISVILLE FE4200HD Series Fiberglass Extension Ladders
- KRYTOX GPL 246 Series Electrical Conducting Grease
- MUELLER INDUSTRIES 794M Duplex Basket Strainers
- RUD CHAIN VRS-F Starpoints, Metric Thread
- APPROVED VENDOR Square Tube
- HUBBELL WIRING DEVICE-KELLEMS Disconnects
- SMC VALVES Vacuum Ejectors
- PRO1 IAQ Nonprogrammable Low Voltage Thermostats
- SPEC Standard Compression Springs, Music Wire, 1.218 Inch Outside Dia.
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C83534 0 Ball End Mill, 4 Flutes, 15/64 Inch Milling Dia, 2.5 Inch Overall Length
€61.54 /unit