FREE delivery on orders over €150
CLEVELAND C81017 0 Square End Mill, Center Cutting, 2 Flutes, 3/16 Inch Milling Dia, 5/16 Inch Length Of Cut
Item: CQ9VBFModel: C81017Cross Ref: 33GH97 / 0
7 In Stock
Ships within 2 days via
10.00% off
€30.07 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 0.312" |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Style | Square |
| End Type | Single End |
| Finish | TiAlN |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 35° |
| Length Of Cut | 5/16" |
| List Number | CEM-SE-2-TA |
| Material | Carbide |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 0.188" |
| Milling Diameter | 3/16" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 2 |
| Overall Length | 2" |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P |
| Shank Dia. | 0.188" |
| Shank Diameter | 3/16" |
| Shank Type | Straight |
| Single End/double End | Single End |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.01 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Shank Dia. | List Number | Overall Length | Number Of Flutes | Finish | Length Of Cut | Grade | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C81078 | 1" | 1" | CEM-SE-2-TA | 4" | 2 | - | - | General Purpose | €562.46 | |
 |
C81083 | 1" | 1" | CEM-SE-2-TA | 6" | 2 | TiAlN | - | General Purpose | €921.45 | |
|
C81058 | 1/2" | 1/2" | CEM-SE-2-TA | 6" | 2 | TiAlN | - | General Purpose | €207.64 | |
|
C81053 | 1/2" | 1/2" | CEM-SE-2-TA | 3" | 2 | TiAlN | - | General Purpose | €127.27 | |
 |
C80655 | 1/2" | 1/2" | CEM-SEST-2-TA | 3" | 2 | TiAlN | - | General Purpose | €125.37 | |
|
C81057 | 1/2" | 1/2" | CEM-SE-2-TA | 4" | 2 | TiAlN | - | General Purpose | €174.92 | |
|
C81059 | 1/2" | 1/2" | CEM-SE-2-TA | 6" | 2 | TiAlN | - | General Purpose | €251.79 |
Explore Products
- APPROVED VENDOR 1NMG2 Sheet Acetal Black 1/2 Inch T 12 x 48 In
- OK INDUSTRIES ST-500 Wire Stripper 30 To 20 Awg 4 In
- VERMONT GAGE 141176670 Plug Gage, Class X, Go, Steel, 0.7667 Inch Size
- DAYTON 31EG96 Transformer In 240/480v Out 120v 5000va
- REGAL 010409AS25 Thread Forming Tap, 1/2-20 Size, H5 Limit, Bottom With Tin Coating
- LINN GEAR 60b26ss Sprocket, 6.222 Inch Pitch Diameter, 1 Inch Stock Bore, Stainless Steel
- TB WOODS 450H41.P35 Oldham Coupling Hub, 12 Mm Size
Explore More
- ECONOLINE
- KEYSHAFT
- MR. CHAIN
- NELSON STUD WELDING INC.
- RADIANS
- Combustible Gas Detectors
- Wet Location Fluorescent Fixtures
- Temporary Job Site Light Heads
- Retaining Ring Assortments
- Stepper Motors
- CONDOR Knit Gloves, Full Finger, Full Dotted, 7 Gauge, Orange
- VIEGA PROPRESS Coupling no stop, Press x Press
- JOHN GUEST Swivel Male Run Tees, NPTF Thread, Acetal Gray
- ACME ELECTRIC WI112 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- ANVIL AF735 Series Multi-Size Lateral Brace Attachments, Plain
- WESTWARD Long Drive Pin Punch
- EXAIR Stainless Steel Vortex Tubes, -50 - 200 Degress F
- MAGLINER Frames
- ENERPAC PACG Air Hydraulic Pumps
- GRAINGER Carbide Chucking Reamers with Straight Shank
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C81017 0 Square End Mill, Center Cutting, 2 Flutes, 3/16 Inch Milling Dia, 5/16 Inch Length Of Cut
€33.40 /unit