FREE delivery on orders over €150
CLEVELAND C76268 0 Square End Mill, Center Cutting, 4 Flutes, 3.50 mm Milling Dia, 11.11 mm Length Of Cut
Item: CQ9WFHModel: C76268Cross Ref: 438W11 / 0
7 In Stock
Ships within 2 days via
10.00% off
€52.09 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 11.11 mm |
| Dimension Type | Metric |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Style | Square |
| End Type | Single End |
| Finish | AlCrN |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 30° |
| List Number | CMCE-4-AL |
| Material | Carbide |
| Material Application | Steel, Aluminum, Brass, Bronze, Carbon Steel, Cast Iron, Hardened Steel, Stainless Steel, Super Alloy |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 3.5 mm |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 4 |
| Overall Length | 38.1 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium |
| Primary Material Application Iso Code | H, K, M, N, P, S |
| Shank Dia. | 3.17 mm |
| Shank Type | Straight |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.12 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Shank Dia. | List Number | Overall Length | Number Of Flutes | Finish | Length Of Cut | Grade | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C81078 | 1" | 1" | CEM-SE-2-TA | 4" | 2 | - | - | General Purpose | €562.46 | |
 |
C81083 | 1" | 1" | CEM-SE-2-TA | 6" | 2 | TiAlN | - | General Purpose | €921.45 | |
|
C81058 | 1/2" | 1/2" | CEM-SE-2-TA | 6" | 2 | TiAlN | - | General Purpose | €207.64 | |
|
C81053 | 1/2" | 1/2" | CEM-SE-2-TA | 3" | 2 | TiAlN | - | General Purpose | €127.27 | |
 |
C80655 | 1/2" | 1/2" | CEM-SEST-2-TA | 3" | 2 | TiAlN | - | General Purpose | €125.37 | |
|
C81057 | 1/2" | 1/2" | CEM-SE-2-TA | 4" | 2 | TiAlN | - | General Purpose | €174.92 | |
|
C81059 | 1/2" | 1/2" | CEM-SE-2-TA | 6" | 2 | TiAlN | - | General Purpose | €251.79 |
Explore Products
- APPLETON ELECTRIC 0ZGFDCC175
- SPEC C07200853500S Compression Spring, 20.2 lbs/In Stiffness Rate, 23 lbs Load Capacity, Stainless Steel
- WESTWARD 10T849 Carbon Steel Thread Die 2 Inch 11/16 Inch 11 Pitch
- AMERICAN WELDQUIP 507CA15T5-TS-ET Mig Gun, Air Cooled, T5, 500 Amp, 15 Feet Length
- MAIN FILTER INC. MF0060321 DHD330F03B Interchange Hydraulic Filter, Glass, 3 Micron Rating, Viton Seal, 7.12 Inch Height
- APPROVED VENDOR 19D863 Carbide Bur Egg 3/8
- BUNTING BEARINGS DPEP081216 Sleeve Bearing, 1/2 Inch I.D., 3/4 Inch O.D., 1 Inch Length
- DIXON B5135P1000L
Explore More
- KEYSHAFT
- DRAGER
- CHAMPION DISHWASHER
- ONYX
- CALIFORNIA AIR TOOLS
- Sander Polisher Accessories
- Gasoline Engines
- Upright Vacuum Cleaners
- ID Card Printers
- Wall and Hand Rail Accessories
- AKRO-MILS 30284 Akrobins Super Size Bins
- OIL SAFE Shut-Off Valve Ball Knobs
- RUD CHAIN Ice Bolts
- LUMAPRO Emergency Lighting Batteries
- KEO Countersinks, 6-Flute, Cobalt
- SPEARS VALVES PVC Schedule 80 Nipples, 1/4 Inch Diameter, Threaded Both Ends
- SPEARS VALVES Reverse In Line 100 GPM CPVC Gray Reverse Tee Filters, EPDM
- TEADIT NA1001 Compresed Full Face Cut Gaskets with Aramid Fibers, NBR Binder
- BISON GEAR & ENGINEERING 750 Series Right Angle DC Gearmotors
- ANVIL AS3064 Series Post Bases
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C76268 0 Square End Mill, Center Cutting, 4 Flutes, 3.50 mm Milling Dia, 11.11 mm Length Of Cut
€57.89 /unit