FREE delivery on orders over €150
CLEVELAND C76201 0 Square End Mill, Carbide, Single End, 1/32 Inch Milling Dia, 2 Flutes
Item: CQ9ULJModel: C76201Cross Ref: 438V43 / 0
7 In Stock
Ships within 2 days via
10.00% off
€55.88 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | No |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 0.094" |
| Cutting Type | Center Cutting |
| Dimension Type | Decimal Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Alcrona |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| Material | Carbide |
| Material Application | Steel, Aluminum, Brass, Bronze, Carbon Steel, Cast Iron, Stainless Steel |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 1/32" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 2 |
| Overall Length | 1 1/2" |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Stainless Steel, Steel |
| Primary Material Application Iso Code | K, M, N, P |
| Shank Dia. | 1/8" |
| Shank Type | Straight |
| Stainless (m) Compatibility | No |
| Steel (p) Compatibility | No |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.12 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Shank Dia. | End Type | Overall Length | Helix Angle | Number Of Flutes | List Number | Length Of Cut | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C60269 | 1/16" | 1/8" | Double End | 1 1/2" | 30° | 4 | CEM-DE-4 | - | €35.77 | |
 |
C60169 | 1/16" | 1/8" | Double End | 1 1/2" | 35° | 2 | CEM-DE-2 | - | €35.63 | |
|
C80269 | 1/16" | 1/8" | Double End | 1 1/2" | 30° | 4 | CEM-DE-4-TA | - | €45.95 | |
 |
C80169 | 1/16" | 1/8" | Double End | 1 1/2" | - | 2 | CEM-DE-2-TA | - | €45.95 | |
|
C60170 | 3/32" | 1/8" | Double End | 1 1/2" | 35° | 2 | CEM-DE-2 | 3/16" | €36.07 | |
|
C60270 | 3/32" | 1/8" | Double End | 1 1/2" | 30° | 4 | CEM-DE-4 | 3/16" | €35.77 | |
|
C80170 | 3/32" | 1/8" | Double End | 1 1/2" | 35° | 2 | CEM-DE-2-TA | 3/16" | €45.41 |
Explore Products
- MILWAUKEE 49-57-8335 Sheet Metal Cutter 2-1/4 In
- SQUARE D PA31400RC Rating Plug 1400 Amp 600vac
- NEW PIG PLR210 Drain Plug Yellow
- REGAL 052157JM Cobalt End Mill, Double End, 11/32 Inch Dia., 3-1/2 Inch Length, 2 Flutes, Bright
- MAIN FILTER INC. MF0056370 Interchange Hydraulic Filter, Glass, 5 Micron, Viton Seal, 16.77 Inch Height
- WALTER TOOLS VCMT160404-FM4 WMP20S 6465441 Diamond Turning Insert, Neutral, 3/16 Inch Thick, 1/64 Inch Corner Radius
- TSUBAKI 25B12E Plain Bore Sprocket, 5/16 Inch Height
Explore More
- KEYSHAFT
- IPG
- STAHLIN
- ZIPPORT
- SKB
- Pallet Lifters and Tilters
- Lab Circulator Accessories
- Water Powered Pumps
- Hammer Drill Bit Sets
- Inline and Tee Filters
- HELICOIL Spiral Point Plugs, 5H, Metric Fine
- IRONCLAD Kong Dexterity Supergrip Gloves
- DESTACO 2007 Series Vertical Hold Down Clamps, Solid Bar
- RUD CHAIN VRS Starpoint Eye Bolts, Metric Thread With Maximum Length
- JOHN GUEST Check Valves
- REVCOR Replacement Propellers
- TRIM LOK INC 119 Series, Rubber Seal D-section
- EATON Motor Control Links
- BOSCH Cables
- RHEEM Insulation Cavities
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C76201 0 Square End Mill, Carbide, Single End, 1/32 Inch Milling Dia, 2 Flutes
€62.08 /unit