FREE delivery on orders over €150
CLEVELAND C76097 Square End Mill, Carbide, Single End, 2.20 mm Milling Dia
Item: CQ9UMPModel: C76097Cross Ref: 438V36
7 In Stock
Ships within 2 days via
13.00% off
€31.04 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Length | 6.6 mm |
| Cutting Type | Center Cutting |
| Dimensions Type | Metric |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Bright Uncoated |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 30° |
| Material | Carbide |
| Material Application | Steel, Aluminum, Brass, Bronze, Carbon Steel, Cast Iron, Hardened Steel, Stainless Steel, Super Alloy |
| Material Grade-machining | General Purpose |
| Milling Dia. | 2.2 mm |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 38.1 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium |
| Primary Material Application Iso Code | H, K, M, N, P, S |
| Shank Dia. | 3.17 mm |
| Shank Type | Straight |
| Stainless Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.12 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Cutting Length | Primary Material Application Iso Code | Shank Dia. | Finish-machining | Dimensions Type | Non Ferrous (n) Compatibility | Hardened Compatibility | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C60269 | 1/16" | 1/8" | N | 1/8" | Bright (Uncoated) | Fractional Inch | No | No | €31.49 | |
 |
C60169 | 1/16" | 1/8" | N | 1/8" | Bright (Uncoated) | Fractional Inch | No | No | €32.29 | |
|
C80269 | 1/16" | 1/8" | K, P | 1/8" | TiAlN | Fractional Inch | Yes | No | €40.43 | |
 |
C80169 | 1/16" | 1/8" | K, P | 1/8" | TiAlN | Fractional Inch | Yes | No | €40.43 | |
|
C60170 | 3/32" | 0.188" | N | 1/8" | Bright (Uncoated) | Fractional Inch | No | No | €31.77 | |
|
C60270 | 3/32" | 0.188" | N | 1/8" | Bright (Uncoated) | Fractional Inch | No | No | €31.49 | |
|
C80170 | 3/32" | 0.188" | K, P | 1/8" | TiAlN | Fractional Inch | Yes | No | €39.97 |
Explore Products
- EATON SF55SH5X5 Disconnect Shaft Extension, 2 Inch Length x 1 Inch Width x 1-1/2 Inch Height
- MORSE CUTTING TOOLS mx1080808
- BOSTON GEAR 10300 Spur Gear, Pressure Angle 14.5 Degree
- APPROVED VENDOR 1NCT3 Compression Spring, 9.57 lbs/In Stiffness Rate, 13.01 lbs Load Capacity, Stainless Steel
- BURNDY YSR29FX2CFXLTCKITC Copper Splice reducer, 250 kcmil to 2 AWG, Tin-plated, clear heat shrink
- EATON HFD4025D29 Molded Case Circuit Breaker, F-Frame, Type Hfd, 4-Pole, 25A, 600 Vac, 250 Vdc
- KURIYAMA d-1616-fj9s
- PROCON 105E140F31BD Rotary Vane Stainless Steel Pump, 140 GPH, EPDM/Nitrile, Standard-Non External Adjust
Explore More
- ADVANCE TABCO
- KEYSHAFT
- LEVITON
- UEI TEST INSTRUMENTS
- VALLEY INDUSTRIES
- Surface Protection Film Dispensers
- Hydraulic Hose Sleeves
- Power Energy Meters
- Communication Cables
- Chemical-Resistant Pedestal Pumps
- DWYER INSTRUMENTS PAFS-1000 Series Averaging Flow Sensors
- PLAST-O-MATIC PRAM Series Air Loaded Pressure Regulators
- REVCOR Blower Wheels, Direct Drive, Single Inlet Forward Curve, Concave
- MUELLER INDUSTRIES 764 Carbon Steel Y Strainers
- RUD CHAIN VLBS Octagon Lifting Rings
- APOLLO VALVES 72-900 Series Carbon Steel SAE Straight Thread Ball Valves
- BALDOR / DODGE 3V Narrow V Belts
- SHARKBITE Male Connectors
- PARKER A-LOK MSEL Series Tube NPT Male Elbows
- ELKAY Drying Racks
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C76097 Square End Mill, Carbide, Single End, 2.20 mm Milling Dia
€35.67 /unit