CLEVELAND C75169 0 Square End Mill, Center Cutting, 2 Flutes, 1 Inch Milling Dia, 4 Inch Overall Length
Get it by Tuesday, Dec 23
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | No |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 1 1/2" |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Style | Square |
| End Type | Single End |
| Finish | Tin |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | HGC-2-TN |
| Material | Cobalt |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 1" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | No |
| Number Of Flutes | 2 |
| Overall Length | 4" |
| Primary Material Application | Stainless Steel, Steel |
| Primary Material Application Iso Code | M, P |
| Shank Dia. | 5/8" |
| Shank Type | Weldon |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.29 |
| Ship height (cm) | 2.59 |
| Ship length (cm) | 10.21 |
| Ship width (cm) | 2.59 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Overall Length | Number Of Flutes | Shank Dia. | List Number | Finish | Length Of Cut | Cutting Direction | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C42633 | 1 1/4" | 4 1/2" | 2 | 1 1/4" | HGC-2 | Bright, Uncoated | - | Right Hand | €194.93 | |
|
C75161 | 1" | 4 1/8" | 2 | 3/4" | HGC-2 | Bright, Uncoated | - | Right Hand | €145.67 | |
|
C75162 | 1" | 4 3/4" | 2 | 1" | HGC-2 | Bright, Uncoated | - | Right Hand | - | RFQ
|
|
C75160 | 1" | 4" | 2 | 5/8" | HGC-2 | Bright, Uncoated | - | Right Hand | €115.04 | |
 |
C75130 | 1/2" | 2 11/16" | 2 | 3/8" | HGC-2 | Bright, Uncoated | - | Right Hand | - | RFQ
|
|
C75131 | 1/2" | 3 1/2" | 2 | 1/2" | HGC-2 | Bright, Uncoated | - | Right Hand | €47.21 | |
 |
C75127 | 1/8" | 2 5/8" | 2 | 3/8" | HGC-2 | - | 3/4" | Right | - | RFQ
|
Explore Products
- MAIN FILTER INC. MF0178464 2060953 Interchange Hydraulic Filter, Glass, 5 Micron, Viton Seal, 8.22 Inch Height
- BALDOR / DODGE 016189 80HCBM Elastomeric Coupling, Shaft Size 3.1875 Inch, Rating 2000 Rpm
- BALDOR / DODGE 20ZJMOUNT TIGEAR-2 E-Z KLEEN JMount Worm Gear Speed Reducer
- QA1 CFR7S Female Stud Rod End Right-hand 7/16-20
- BOSTON GEAR 70638
- MARTIN SPROCKET 120R21H Sprocket, 120 Chain, 21 Teeth, 10.064 Inch Pitch Dia., 10.852 Inch O.D., Steel
- EATON AN13BN0B5E1P6 Non-Reversing Starter, 18 A, 220/50V Coil, C440 Standard Feature Set - 0.33-1.65 A
- WOODHEAD 1300980213 5595-008W Support Grip, Strain Relief, 90 Degree Male, 4.75mm, O Ring
Explore More
- CORBIN
- KEYSHAFT
- SINGER SAFETY
- CROWN VERITY
- VALCOOL
- Plug-In Wall Switch Timers
- Patch Cords
- Security Carts
- Manometer Accessories
- Emergency Lighting Batteries
- REVCOR Propeller, 24 inch
- HELICOIL Spiral Flute Taps, Bottoming, UNF, 2B
- UVEX BY HONEYWELL SVP 200 Series Safety Eyewears
- JOHN GUEST Male Connectors, NPTF Thread, Acetal Gray
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 600V Delta Primary Volts, 480Y/277 Tap Secondary Volts
- RUBBERMAID Twisted Loop Dust Mop
- SCHNEIDER ELECTRIC Enclosed Power Relays
- APPROVED VENDOR Ground Clamp Jaw Open
- FALLTECH Controls
- STARRETT 20 Master Precision Squares
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C75169 0 Square End Mill, Center Cutting, 2 Flutes, 1 Inch Milling Dia, 4 Inch Overall Length