FREE delivery on orders over €150
CLEVELAND C70459 Square End Mill, Center Cutting, 3 Flutes, 1/2 Inch Milling Dia, 5/8 Inch Length Of Cut
Item: CQ9VMLModel: C70459Cross Ref: 33GC81
7 In Stock
Ships within 2 days via
€201.17 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | No |
| Chip Breaker | Yes |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Length | 5/8" |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Titanium Carbonitride |
| Grade | High Performance |
| Hardened Compatibility | No |
| Helix Angle | 38° |
| List Number | CEM RA TC |
| Material | Carbide |
| Material Grade | HIGH PERFORMANCE |
| Material Grade-machining | High Performance |
| Measurement System | Fractional Inch |
| Milling Dia. | 1/2" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 3 |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 2 1/2" |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Magnesium |
| Primary Material Application Iso Code | N |
| Shank Dia. | 1/2" |
| Shank Type | Weldon Flat |
| Single End/double End | Single End |
| Stainless Compatibility | No |
| Steel (p) Compatibility | No |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.1 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.51 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Model | Cutting Length | Shank Dia. | Milling Dia. | Finish | List Number | Material | Primary Material Application Iso Code | Material Grade-machining | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| C60469 | 1 1/2" | 1" | 1" | Bright Uncoated | CEM RA | Carbide | N | High Performance | €433.78 | |
| C70469 | 1 1/2" | 1" | 1" | Titanium Carbonitride | CEM RA TC | Carbide | N | High Performance | €521.82 | |
| C70468 | 1 1/8" | 1" | 1" | Titanium Carbonitride | CEM RA TC | Carbide | N | High Performance | €454.18 | |
| C60468 | 1 1/8" | 1" | 1" | Bright Uncoated | CEM RA | Carbide | N | High Performance | €414.09 | |
| C70470 | 2 1/4" | 1" | - | Titanium Carbonitride | CEM RA TC | Carbide | N | High Performance | €710.63 | |
| C60470 | 2 1/4" | 1" | 1" | - | CEM RA | Carbide | N | High Performance | €623.53 | |
| C60460 | 1" | 1/2" | 1/2" | Bright Uncoated | CEM RA | Carbide | N | High Performance | €143.27 |
Explore Products
- GEMS SENSORS 26md3m0 26MD3M0
- REGAL 008259AS53 Hand Tap, #10-32 Size, H1 Limit, 2 Flutes, Plug With Nitride & Steam Oxide
- BEHRINGER SYSTEMS US1025-AL BEHRINGER PIPE SYSTEMS US1025-AL
- EATON XTAE015B01CP16 Electronic Motor Starter, 15 A, 415 V 50 Hz, 480 V 60 Hz, 1Nc, B Frame, 45 mm, 0.1-0.16 A
- GLOBE SCIENTIFIC LT-1X500P Labeling Tape, 1 Inch x 500 Inch per Roll, Pink
- VESTIL H-50-MD-GRN-T Steel Medium Duty Low Profile Self Dumping Hopper, 1/2 Cubic Yard, 4000 lb Capacity, Green
- SMC VALVES NCDA1B150-0700N Tie Rod Cylinder, 1.5 To 4 Inch Bore Range
- HUBBELL WIRING DEVICE-KELLEMS 03308009 Slack Pulling Grips, Single Offset Eye, 2.50-2.99 Inch
Explore More
- CANTEX
- KEYSHAFT
- REOTEMP
- GC VALVES
- MARTOR
- Security Seals
- Telescoping Gage Sets
- Wire Terminal Blocks
- Tote Lids
- Riot Gear
- MEMPHIS GLOVE Luminator Leather Drivers Insulated Work Gloves
- LUMAPRO U Bend Light Bulbs
- ASSOCIATED SPRING RAYMOND CU11800 Gas Springs
- MUELLER INDUSTRIES 792M Duplex Basket Strainers
- GLOBE SCIENTIFIC Diamond Essentials PP Griffin Style Low Form Beakers
- MILLER - WELDCRAFT Collet Body Copper
- SANDUSKY LEE Shelving Units
- KRYTOX GPL 107 Series General Purpose Oil
- VESTIL PMC-PM5 Series Pallet Trucks, Pramac
- BANJO FITTINGS On/Off Electric Manifold Valves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C70459 Square End Mill, Center Cutting, 3 Flutes, 1/2 Inch Milling Dia, 5/8 Inch Length Of Cut
€201.17 /unit