FREE delivery on orders over €150
CLEVELAND C70456 Square End Mill, Center Cutting, 3 Flutes, 1/4 Inch Milling Dia, 3/4 Inch Lg of Cut
Item: CX7NJMModel: C70456Cross Ref: 33GC78
7 In Stock
Ships within 2 days via
€79.00 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Cast Iron (k) Compatibility | No |
| Chip Breaker | Yes |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Type | Single End |
| Finish | TiCN |
| Grade | High Performance |
| Hardened Compatibility | No |
| Helix Angle | 38° |
| Length Of Cut | 3/4" |
| List Number | CEM RA TC |
| Material | Carbide |
| Material Grade | HIGH PERFORMANCE |
| Material Grade-machining | High Performance |
| Milling Dia. | 1/4" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 3 |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 2 1/2" |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Magnesium |
| Primary Material Application Iso Code | N |
| Shank Dia. | 1/4" |
| Shank Type | Weldon Flat |
| Single End/double End | Single End |
| Stainless Compatibility | No |
| Steel (p) Compatibility | No |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.03 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 6.35 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Explore Products
- EATON XTAE018C10TD5E005 Non-Reversing Electronic Motor Starter, 18 A, 24-27 Vdc, 1No, C Frame, 45 mm, 1-5 A Xtoe
- EARNEST 534338G1 Fully Threaded Stud, 5/8 In - 11 Thread Size, Steel, 5 In Lg., Blk Oxide, 105000 psi Min. Yield Strength
- RIDGID 92592 O-Ring, Battery Door
- SIOUX CHIEF 665XA2N500 Tubing, Type A, 1/2 in ODx500 ft Coil L, Natural, Domestic
- WINSMITH E26MDSS51190DN Gear Reducer, 56C Input Flange, Hollow Bore
- GATES 7834-6070 Multi-Duty QD Style Sheave 6 Grooves
- TIGER TRACK 350F-1000-14-12 Light Duty Foundationless Jib Crane, 1000 lb Capacity, 14 ft Reach, 360 Deg. Swivel Angle
Explore More
- KEYSHAFT
- Vehicle Strobes and Beacons
- Hammer Drill Bits
- Draft Booster Motors
- Yoke Ends
- Flask Stabilizer Rings
- SHARPE VALVES Ductile Iron Inline Oil Patch Ball Valve, FNPT x FNPT
- MEMPHIS GLOVE Luminator Leather Drivers High Visibility Work Gloves
- ANSELL 39-124 Alphatec Nitrile Gloves
- RUD CHAIN VRBS Weld On Blocks
- KEO Metric Keyseat Cutters, Shank Type, High Speed Steel
- GPI Fastener and Seal Kits
- DYNABRADE Contact Arm Assemblies
- SMITH BEARING HR-XC Series Cam Follower, Crowned, Screwdriver Slot
- SPEAKMAN Neo SM-1010-P Series Shower Combination Units
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C70456 Square End Mill, Center Cutting, 3 Flutes, 1/4 Inch Milling Dia, 3/4 Inch Lg of Cut
€79.00 /unit