FREE delivery on orders over €150
CLEVELAND C63555 Ball End Mill, 4 Flutes, 7/16 Inch Milling Dia, 2.5 Inch Overall Length
Item: CQ9EDZModel: C63555Cross Ref: 33GC37
7 In Stock
Ships within 2 days via
€75.25 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 5/8" |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | Bright Uncoated |
| Finish-machining | Bright (Uncoated) |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 30° |
| List Number | CEM-SE-4B |
| Material | Carbide |
| Material Application | Aluminum, Carbon Steel, Alloy Steel, Cast Iron |
| Material Grade-machining | General Purpose |
| Material-machining | Carbide |
| Milling Dia. | 7/16" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 4 |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 2 1/2" |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Magnesium |
| Primary Material Application Iso Code | N, P, K |
| Shank Dia. | 7/16" |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Single End/double End | Single End |
| Spiral Direction | Right Hand |
| Stainless Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.08 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.89 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Material | Milling Dia. | Cutting Length | Primary Material Application Iso Code | Shank Dia. | Material-machining | Finish-machining | Helix Angle | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C60974 | Carbide | 1" | 3" | N, P, K | 1" | Carbide | Bright (Uncoated) | 30° | €806.09 | |
 |
C80974 | Carbide | 1" | 3" | K, P, M | 1" | Carbide | TiAlN | 30° | €943.19 | |
 |
C60972 | Carbide | 1" | 1 1/2" | N, P, K | 1" | Carbide | Bright (Uncoated) | 30° | €520.48 | |
|
C80972 | Carbide | 1" | 1 1/2" | K, P, M | 1" | Carbide | TiAlN | 30° | €575.44 | |
|
C60973 | Carbide | 1" | 2 1/4" | N, P, K | 1" | Carbide | Bright (Uncoated) | 30° | €728.07 | |
|
C80956 | Carbide | 1/2" | 1" | K, P, M | 1/2" | Carbide | TiAlN | 30° | €131.19 | |
|
C60956 | Carbide | 1/2" | 1" | N, P, K | 1/2" | Carbide | Bright (Uncoated) | 30° | €108.58 |
Explore Products
- APPROVED VENDOR VT104SP Hopper
- VULCAN HART 409666-2 Fry Tank Cover, Stainless Steel
- GENERAL PIPE CLEANERS 105040 DR-C Drain Cleaner, 35 Feet Length, 3/8 Inch Cable, Cutter Set
- APPROVED VENDOR SFT1212CQ Drill Bushing Type Slip Fixed Drill Size # 43
- REGAL 092176PS Setting Plug Gage, #1-3/16-18 UNEF, Not Go Member 3A, Bright
- JACKSON SAFETY V8006200
- ENERPAC rsl3000dk Rsl3000 Dialock Kit
- SMC VALVES AW30-N03E-18Z-B Filter Regulator
Explore More
- CELLTREAT
- KEYSHAFT
- SIEVERT
- LUMINATION
- MR HEATER
- Screw/Bolt Extractor Sets
- Marking Flags
- Aluminum Service Poles
- Manual Lifting and Mounting Suction Cups
- Manual Diaphragm Valves
- DESTACO 9500 Series Pneumatic Swing Clamps
- AKRO-MILS 35230 Nest And Stack Totes
- ANSELL 80-400 Activarmr Blue Yellow Natural Rubber Latex Coated Gloves
- ANSELL 97-505 Activarmr Cut Resistant Gloves
- ANSELL 11-518 Hyflex Ultralight Polyurethane Cut Resistant Gloves
- APPROVED VENDOR 3/16" Pin Dia. Grade 1004-1045 Carbon Steel Knurled Dowel Pins
- HUMBOLDT Vebe Consistometers
- SMC VALVES Tuz Series Wear Resistant Tubing
- CROWN BOILER CO. Dampers
- TUNGALOY A-SVZBR/L Indexable Internal Turning Tools
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C63555 Ball End Mill, 4 Flutes, 7/16 Inch Milling Dia, 2.5 Inch Overall Length
€75.25 /unit