FREE delivery on orders over €150
CLEVELAND C63518 0 Ball End Mill, 4 Flutes, 7/64 Inch Milling Dia
Item: CQ9EKGModel: C63518Cross Ref: 33GA99 / 0
7 In Stock
Ships within 2 days via
10.00% off
€27.08 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 3/8" |
| Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Ball Nose |
| Finish | Bright, Uncoated |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 30° |
| Material | Carbide |
| Material Application | Aluminum, Carbon Steel, Alloy Steel, Cast Iron |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 0.1094" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 1 1/2" |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Magnesium |
| Primary Material Application Iso Code | N, P, K |
| Shank Dia. | 1/8" |
| Shank Type | Straight |
| Spiral Direction | Right Hand |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Model | Milling Dia. | Helix Angle | End Type | Number Of Flutes | List Number | Length Of Cut | Cutting Length | End Mill Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| C70374 | 0.021" | 30° | Single End | 2 | CEM-EG-2 | 1/25" | 0.031" | Engraving | €64.44 | |
| C70376 | 0.03" | 30° | Single End | 2 | CEM-EG-2 | 1/25" | 0.031" | Engraving | €64.44 | |
| C70375 | 0.025" | 30° | Single End | 2 | CEM-EG-2 | 1/25" | 0.031" | Engraving | €64.44 | |
| C60917 | 1/16" | 30° | Single End | 2 | - | - | 1/4" | Finishing | €31.28 | |
| C60916 | 1/16" | 30° | Single End | 2 | - | - | 1/8" | Finishing | €24.84 | |
| C80917 | 1/16" | 30° | Single End | 2 | - | - | 1/4" | Finishing | €39.23 | |
| C80916 | 1/16" | 30° | Single End | 2 | - | - | 1/8" | Finishing | €33.55 |
Explore Products
- CASH VALVE FRM2CCZSZSZH06-E4 Cryogenic Valve, 1/2 Inch Size, 75-150 PSI, Stainless Steel
- GRAINGER U04008.125.0325 Hex Structural Bolt, 1 1/4 In - 7 Thread Size, Steel, 3 1/4 In Lg., Blk Oxide, Gr. A490
- WATTS STMF&TTRP-8GF-15 0036144 Float Trap, Max 15 PSI, 1 1/4 Inch Size
- HUB CITY 0220-81961 Worm Gear Speed Reducer, Solid Input/Output Shaft, Right Worm
- EATON HMCP400A5Z07 Motor Circuit Protector, 400A, 3-Pole, Frame K, 350-700A, 600 V, 250 Vdc
- HOFFMAN P2F2288 Frame, 2200 x 800 x 800mm Size, Gray, Steel
- MEPCO 44-475G Steam Trap, 1 Inch NPT Connections, 4 7/8 Inch End to End Length, 75 Psi Max. Op Psi
- SANI-LAV 4004 Scoop 64 Ounce 304 Stainless Steel
Explore More
- KEYSHAFT
- SINGER SAFETY
- UNIWELD
- DIAMABRUSH
- RIP TIE
- Paint Edgers and Refills
- Transfer Tanks
- Manual Air Control Valves
- Revolving Storage Bins and Racks
- Non-Illuminated Push Buttons with Contact Blocks
- AKRO-MILS 30224 Akrobins Plastic Storage Bins
- PYRAMEX Venture 3 Half Frame Eyewears
- GLOBE SCIENTIFIC Diamond Essentials PMP Griffin Style Low Form Beakers
- IPEX USA LLC w/Swing Arm Swing Check Valve
- EATON Ampgard Series Contactors
- REGAL Extension Hand Taps, Taper, HSS, TiCN
- SLOAN Sloan 8113 Exposed Sensor Water Closet Flushometers
- PELICAN Micro Cases
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C63518 0 Ball End Mill, 4 Flutes, 7/64 Inch Milling Dia
€30.09 /unit